# Water quality in Bayville, NY (Nassau County)

- Water source: Public water
- Supplier / district: Inc. Village of Bayville
- Supplier contact: Inc. Village of Bayville (https://bayvilleny.gov/wp-content/uploads/2026/04/bayville_water_quality_2025.pdf)
- Report year: 2025 · Verified: 2026-11-11
- Web page: https://www.fieldstonewater.com/water/bayville
- JSON: https://www.fieldstonewater.com/api/v1/towns/bayville

Where the report prints both an average and a range, the status column here is judged on the average; where it prints a maximum or a 90th-percentile result, that figure is used. 97% of Bayville's land lies inside a public water service area (Bayville (Village)), per the NYS Department of Health boundaries EPA publishes. A service area is where mains run; a home inside it can still be on a private well.

## Summary

No contaminant averaged above its limit in the reported year.
Detected: Copper, Lead, Barium, Sodium, Chloride, Iron, Copper, Nitrate, Ammonia (as N), Turbidity, Nickel, Magnesium, Sulfate, Calcium, Gross alpha, Gross beta, Combined Radium 226/228, Uranium, Free Chlorine, pH, Alkalinity, Corrosivity (LSI), Calcium hardness, Hardness (total), Total Dissolved Solids, Specific conductance.

## Contaminants

| Contaminant | Average | Range | Unit | Limit | Limit source | Status | Peak above limit | Samples |
|---|---|---|---|---|---|---|---|---|
| Copper | 0.093 | 0.0091 to 0.17 | mg/L | 1.3 | EPA action level | detected | no | — |
| Lead | 1.9 | ND to 3.1 | µg/L | 15 | EPA action level | detected | no | — |
| Barium | 0.0029 | 0.0025 to 0.0029 | mg/L | 2.0 | EPA MCL | detected | no | — |
| Sodium | 11.8 | 3.16 to 11.8 | mg/L | — | NYS guidance (20 mg/L for sodium-restricted diets) | detected | no | — |
| Chloride | 26.2 | 5.78 to 26.2 | mg/L | 250 | NYS secondary standard | detected | no | — |
| Iron | 0.155 | ND to 0.155 | mg/L | 300 | NYS secondary standard | detected | no | — |
| Copper | 0.0055 | ND to 0.0055 | mg/L | 1.3 | EPA action level | detected | no | — |
| Nitrate | 1.06 | 0.61 to 1.06 | mg/L | 10 | EPA MCL | detected | no | — |
| Ammonia (as N) | 2.0 | ND to 2.0 | mg/L | — | No regulatory limit | detected | no | — |
| Turbidity | 3.01 | ND to 3.01 | NTU | 5 | EPA MCL | detected | no | — |
| Nickel | 0.0008 | ND to 0.0008 | mg/L | 100 | EPA MCL | detected | no | — |
| Magnesium | 1.88 | 1.05 to 1.88 | mg/L | — | No regulatory limit | detected | no | — |
| Sulfate | 3.65 | ND to 3.65 | mg/L | 250 | NYS secondary standard | detected | no | — |
| Calcium | 3.5 | 2.69 to 3.5 | mg/L | — | No regulatory limit | detected | no | — |
| Gross alpha | 0.249 | ND to 0.249 | pCi/L | 15 | EPA MCL | detected | no | — |
| Gross beta | 0.807 | 0.680 to 0.807 | pCi/L | 50 | EPA MCL | detected | no | — |
| Combined Radium 226/228 | 0.987 | 0.117 to 0.987 | pCi/L | 5 | EPA MCL | detected | no | — |
| Uranium | 0.125 | ND to 0.125 | µg/L | 30 | EPA MCL | detected | no | — |
| Free Chlorine | 0.86 | 0.38 to 0.86 | mg/L | 4.0 | EPA MRDL | detected | no | — |
| pH | 8.2 | 7.3 to 8.2 | Units | — | NYS guidance range 7.5–8.5 | detected | no | — |
| Alkalinity | 28.5 | 10.0 to 28.5 | mg/L | — | No regulatory limit | detected | no | — |
| Corrosivity (LSI) | -3.6 | -1.23 to -3.6 | LSI | — | No regulatory limit | detected | no | — |
| Calcium hardness | 8.8 | 6.71 to 8.8 | mg/L | — | No regulatory limit | detected | no | — |
| Hardness (total) | 14.9 | 11.0 to 14.9 | mg/L | — | No regulatory limit | detected | no | — |
| Total Dissolved Solids | 81.0 | 37.0 to 81.0 | mg/L | — | No regulatory limit | detected | no | — |
| Specific conductance | 97.7 | 52.4 to 97.7 | umhos/cm | — | No regulatory limit | detected | no | — |
| HFPO-DA | — | ND to ND | µg/L | — | EPA MCL of 0.010 µg/L takes effect 2029; no limit in force | not-detected | no | 6 |
| PFHxS | — | ND to ND | µg/L | — | EPA MCL of 0.010 µg/L takes effect 2029; no limit in force | not-detected | no | 6 |
| PFBS | — | ND to ND | µg/L | — | No regulatory limit | not-detected | no | 6 |
| PFNA | — | ND to ND | µg/L | — | EPA MCL of 0.010 µg/L takes effect 2029; no limit in force | not-detected | no | 6 |

## Sources

- Inc. Village of Bayville 2025 Annual Water Quality Report: https://bayvilleny.gov/wp-content/uploads/2026/04/bayville_water_quality_2025.pdf
- EPA UCMR 5 PFAS results, 2023–2025 (entry-point samples): https://www.epa.gov/dwucmr/occurrence-data-unregulated-contaminant-monitoring-rule

## EPA compliance record (suppliers serving this community's ZIP codes)

| System | EPA ID | Violations | Health-based | All time | Window | EPA report |
|---|---|---|---|---|---|---|
| Bayville (Village) | NY2902816 | 1 | 0 | 1 | 2022–2026 | https://echo.epa.gov/detailed-facility-report?fid=NY2902816 |

## Notes on this data

- Public-water figures are annual results published by the water supplier in its Annual Drinking Water Quality Report (CCR), reported across all wells feeding a distribution area. They describe water leaving the supplier, not the tap in a specific home.
- Private wells are not covered by any public report. Well owners need their own test.
- Status compares the reported average (or the range high where no average is published) to the regulatory limit. 'exceeds' is a numeric comparison, not a regulatory violation finding; see violationFlag for what the supplier reported.
- epaSystems lists the public water systems that report serving this community's ZIP codes (EPA UCMR 5 ZIP list) with their EPA SDWIS violation counts. Counts are compliance events, not contaminant levels.
- publicWaterCoverage: share (0-1) of the community's land inside a public water system service area, from the NYS DOH boundaries EPA publishes; >=0.9 is shown as public water, <=0.1 as private wells, between as mixed.
- areaAssignment: 'inferred' means the SCWA distribution area was taken from neighboring mapped communities, not read from SCWA's map; confirm with SCWA's address lookup.
- dataTier: 'report' = rows from the supplier's annual water quality report; 'epa' = EPA-reported lead and PFAS sampling results so far; 'none' = no public supplier mapped (private wells).
- peakAboveLimit marks a contaminant whose highest single sample was above the limit even though its average was not. Compliance is judged on averages; peaks show what some homes may have received at times.
- Units: µg/L = micrograms per liter = parts per billion; mg/L = milligrams per liter = parts per million. ND = not detected.

## What this means for treatment

For Bayville, the numbers point first to whole-house carbon filtration: chlorine residual 0.86 mg/L.

- **Whole-House Carbon Filtration** (recommended): Chlorine residual 0.86 mg/L. Free chlorine averaged 0.86 mg/L at the entry point (limit 4), the residual that gives tap water its pool taste and dries skin and hair.
- **Under-Sink Reverse Osmosis** (worth considering): Drinking-water polish. The supplier's 90th-percentile lead result was 0.0019 mg/L (2 ppb) against the 15 ppb action level. Lead enters water from a home's own service line and fixtures, so the system figure says little about any one house; a filter certified for lead (NSF/ANSI 53) or reverse osmosis at the kitchen tap reduces it at the point you drink.
- **Whole-House + Softener Combo** (not needed): Hardness 14.9 mg/L, about 0.9 grains per gallon. At 14.9 mg/L (0.9 gpg) the water is soft. A softener is not needed.

## Test your own water

A utility report describes the supply, not your tap, and does not cover private wells. Fieldstone Water Co. offers a free in-home water test across Long Island: call 516-43WATER (516-439-2837) or book at https://www.fieldstonewater.com/free-water-test.

---
Compilation © Fieldstone Water Co., licensed CC BY 4.0 (the underlying public records are not ours to copyright): reuse with attribution and a link to https://www.fieldstonewater.com/water/bayville, keeping each figure's source citation. Text and explainers all rights reserved. https://www.fieldstonewater.com/terms#data-license
