# Water quality in East Meadow, NY (Nassau County)

- Water source: Public water
- Supplier / district: Town of Hempstead Department of Water (Bowling Green Estates, East Meadow, Levittown, Roosevelt Field and Uniondale Water Districts)
- Supplier contact: Town of Hempstead Department of Water (Bowling Green Estates, East Meadow, Levittown, Roosevelt Field and Uniondale Water Districts) (https://hempsteadny.gov/DocumentCenter/View/8536/Water-Quality-Report-All-Districts-2026-PDF)
- Report year: 2025 · Verified: 2026-11-11
- Web page: https://www.fieldstonewater.com/water/east-meadow
- JSON: https://www.fieldstonewater.com/api/v1/towns/east-meadow

Where the report prints both an average and a range, the status column here is judged on the average; where it prints a maximum or a 90th-percentile result, that figure is used. The report carries 3 notices: IMPORTANT INFORMATION ABOUT YOUR DRINKING WATER - Deferral Issued for 1,4-Dioxane in the Town of Hempstead: testing found 1,4-dioxane above New York State's MCL of 1 ppb; NYSDOH issued a deferral with a corrective-action schedule (treatment needed on 21 wells at eleven sites; nearly $150 million committed). Notice signed 'Public Water System ID# 2900000, Town of Hempstead Department of Water, Date August 25, 2022'; states 'The deferral is effective until August 25, 2023.' EMERGING CONTAMINANT INFORMATION: NYSDOH granted a two-year deferral (with potential one-year extension) for 1,4-dioxane; interconnection with Westbury Water District, which also operates under a deferral (normally closed, opened only in emergencies). Report states 'our system had no violations' and DISTRICT DATA prints VIOLATIONS OF STANDARDS 0. 100% of East Meadow's land lies inside a public water service area (Town of Hempstead Water Department), per the NYS Department of Health boundaries EPA publishes. A service area is where mains run; a home inside it can still be on a private well.

## Summary

Reported above a limit: 1,4-Dioxane.
Detected: Copper, Lead, Nitrate, Iron, Barium, Nickel, Sulfate, Sodium, Chloride, Magnesium, Calcium, Corrosivity (LSI), Alkalinity, Hardness (total), Calcium hardness, Odor, pH, Turbidity, Total Dissolved Solids, Perchlorate, Gross alpha, Gross beta, Combined Radium 226/228, Uranium, 1,1-Dichloroethane, cis-1,2-Dichloroethene, Tetrachloroethene (PCE), PFOA, PFOS, PFBA, PFNA, PFHpA, PFHxA, PFHxS, PFPeA, Total Trihalomethanes, Bromodichloromethane, Bromoform, Chloroform, Dibromochloromethane, Free Chlorine.

## Contaminants

| Contaminant | Average | Range | Unit | Limit | Limit source | Status | Peak above limit | Samples |
|---|---|---|---|---|---|---|---|---|
| Copper | 0.097 | 0.0036 to 0.72 | mg/L | 1.3 | EPA action level | detected | no | — |
| Lead | 1.0 | ND to 3.2 | µg/L | 15 | EPA action level | detected | no | — |
| Nitrate | — | 0.46 to 7.0 | mg/L | 10.0 | EPA MCL | detected | no | — |
| Iron | — | ND to 97 | µg/L | 300 | NYS secondary standard | detected | no | — |
| Barium | — | 0.0041 to 0.012 | mg/L | 2.0 | EPA MCL | detected | no | — |
| Nickel | — | 0.00079 to 0.0064 | mg/L | — | No regulatory limit | detected | no | — |
| Sulfate | — | ND to 17.1 | mg/L | 250 | NYS secondary standard | detected | no | — |
| Sodium | — | 8.5 to 37.5 | mg/L | — | NYS guidance (20 mg/L for sodium-restricted diets) | detected | no | — |
| Chloride | — | 9.7 to 71.4 | mg/L | 250 | NYS secondary standard | detected | no | — |
| Magnesium | — | 1.4 to 3.9 | mg/L | — | No regulatory limit | detected | no | — |
| Calcium | — | 1.6 to 25.8 | mg/L | — | No regulatory limit | detected | no | — |
| Corrosivity (LSI) | — | -0.94 to -2.70 | mg/L | — | No regulatory limit | detected | no | — |
| Alkalinity | — | 3.4 to 56.6 | mg/L | — | No regulatory limit | detected | no | — |
| Hardness (total) | — | 14.8 to 80.4 | mg/L | — | No regulatory limit | detected | no | — |
| Calcium hardness | — | 4.1 to 33.7 | mg/L | — | No regulatory limit | detected | no | — |
| Odor | — | ND to 2 | Units | 3 | NYS secondary standard | detected | no | — |
| pH | — | 6.25 to 8.87 | Units | — | NYS guidance range 7.5–8.5 | detected | no | — |
| Turbidity | — | ND to 2.0 | NTU | 5 | EPA MCL | detected | no | — |
| Total Dissolved Solids | — | 59.0 to 204 | mg/L | — | No regulatory limit | detected | no | — |
| Perchlorate | — | ND to 3.4 | µg/L | 18 | NYS MCL | detected | no | — |
| Gross alpha | — | ND to 8.39 | pCi/L | 15 | EPA MCL | detected | no | — |
| Gross beta | — | ND to 6.24 | pCi/L | 50 | EPA MCL | detected | no | — |
| Combined Radium 226/228 | — | ND to 3.96 | pCi/L | 5 | EPA MCL | detected | no | — |
| Uranium | — | ND to 8.39 | µg/L | 30 | EPA MCL | detected | no | — |
| 1,1-Dichloroethane | — | ND to 3.40 | µg/L | 5 | EPA MCL | detected | no | — |
| cis-1,2-Dichloroethene | — | ND to 0.69 | µg/L | 5 | EPA MCL | detected | no | — |
| Tetrachloroethene (PCE) | — | ND to 0.71 | µg/L | 5 | EPA MCL | detected | no | — |
| 1,4-Dioxane | — | ND to 2.5 | µg/L | 1 | NYS MCL | exceeds | yes | — |
| PFOA | — | ND to 6.2 | ng/L | 10 | NYS MCL | detected | no | — |
| PFOS | — | ND to 6.0 | ng/L | 10 | NYS MCL | detected | no | — |
| PFBA | — | ND to 3.3 | ng/L | — | No regulatory limit | detected | no | — |
| PFNA | — | ND to 2.5 | ng/L | — | No regulatory limit | detected | no | — |
| PFHpA | — | ND to 2.2 | ng/L | — | No regulatory limit | detected | no | — |
| PFHxA | — | ND to 3.5 | ng/L | — | No regulatory limit | detected | no | — |
| PFHxS | — | ND to 2.0 | ng/L | — | No regulatory limit | detected | no | — |
| PFPeA | — | ND to 6.5 | ng/L | — | No regulatory limit | detected | no | — |
| Total Trihalomethanes | 1.350 | 0.530 to 2.910 | µg/L | 80 | EPA MCL | detected | no | — |
| Bromodichloromethane | — | ND to 1.3 | µg/L | — | No regulatory limit | detected | no | — |
| Bromoform | — | ND to 1.9 | µg/L | — | No regulatory limit | detected | no | — |
| Chloroform | — | ND to 0.72 | µg/L | — | No regulatory limit | detected | no | — |
| Dibromochloromethane | — | ND to 1.9 | µg/L | — | No regulatory limit | detected | no | — |
| Free Chlorine | — | 0.20 to 1.14 | mg/L | 4 | EPA MRDL | detected | no | — |
| PFBS | — | ND to ND | µg/L | — | No regulatory limit | not-detected | no | 26 |
| HFPO-DA | — | ND to ND | µg/L | — | EPA MCL of 0.010 µg/L takes effect 2029; no limit in force | not-detected | no | 26 |

## Sources

- Town of Hempstead Department of Water (Bowling Green Estates, East Meadow, Levittown, Roosevelt Field and Uniondale Water Districts) 2025 Annual Water Quality Report: https://hempsteadny.gov/DocumentCenter/View/8536/Water-Quality-Report-All-Districts-2026-PDF
- EPA UCMR 5 PFAS results, 2023–2025 (entry-point samples): https://www.epa.gov/dwucmr/occurrence-data-unregulated-contaminant-monitoring-rule

## EPA compliance record (suppliers serving this community's ZIP codes)

| System | EPA ID | Violations | Health-based | All time | Window | EPA report |
|---|---|---|---|---|---|---|
| Town of Hempstead Water Department | NY2900000 | 0 | 0 | 0 | 2022–2026 | https://echo.epa.gov/detailed-facility-report?fid=NY2900000 |

## Notes on this data

- Public-water figures are annual results published by the water supplier in its Annual Drinking Water Quality Report (CCR), reported across all wells feeding a distribution area. They describe water leaving the supplier, not the tap in a specific home.
- Private wells are not covered by any public report. Well owners need their own test.
- Status compares the reported average (or the range high where no average is published) to the regulatory limit. 'exceeds' is a numeric comparison, not a regulatory violation finding; see violationFlag for what the supplier reported.
- epaSystems lists the public water systems that report serving this community's ZIP codes (EPA UCMR 5 ZIP list) with their EPA SDWIS violation counts. Counts are compliance events, not contaminant levels.
- publicWaterCoverage: share (0-1) of the community's land inside a public water system service area, from the NYS DOH boundaries EPA publishes; >=0.9 is shown as public water, <=0.1 as private wells, between as mixed.
- areaAssignment: 'inferred' means the SCWA distribution area was taken from neighboring mapped communities, not read from SCWA's map; confirm with SCWA's address lookup.
- dataTier: 'report' = rows from the supplier's annual water quality report; 'epa' = EPA-reported lead and PFAS sampling results so far; 'none' = no public supplier mapped (private wells).
- peakAboveLimit marks a contaminant whose highest single sample was above the limit even though its average was not. Compliance is judged on averages; peaks show what some homes may have received at times.
- Units: µg/L = micrograms per liter = parts per billion; mg/L = milligrams per liter = parts per million. ND = not detected.

## What this means for treatment

For East Meadow, the numbers point first to under-sink reverse osmosis and whole-house carbon filtration: dissolved contaminants close to their limits.

- **Under-Sink Reverse Osmosis** (recommended): Dissolved contaminants close to their limits. Nitrate averaged 7 mg/L with samples up to 7 against a 10 mg/L limit — the closest number to its limit here. It passes straight through carbon; reverse osmosis is designed to reduce it at the tap. PFOA/PFOS reached 6.2 ng/L (ppt) in at least one sample — under New York's 10 ppt limit but at or above the 4.0 ppt federal MCL, with federal compliance due April 26, 2029. Whether an under-sink reverse osmosis model reduces PFOA or PFOS depends on that model's certification or performance data sheet. Sodium averaged 37.5 mg/L, above the 20 mg/L level New York flags for sodium-restricted diets. Perchlorate was detected up to 3.4 µg/L (limit 18). The supplier's 90th-percentile lead result was 0.001 mg/L (1 ppb) against the 15 ppb action level. Lead enters water from a home's own service line and fixtures, so the system figure says little about any one house; a filter certified for lead (NSF/ANSI 53) or reverse osmosis at the kitchen tap reduces it at the point you drink.
- **Whole-House Carbon Filtration** (recommended): Solvent traces and chlorine in the supply. Free chlorine averaged 1.14 mg/L at the entry point (limit 4), the residual that gives tap water its pool taste and dries skin and hair. Chlorination by-products (trihalomethanes) reached 1.3 µg/L in some samples against an 80 µg/L limit for the group; they are absorbed in the shower as well as drunk. Solvent traces were detected: Tetrachloroethene (PCE) up to 0.71 µg/L, cis-1,2-Dichloroethene up to 0.69 µg/L (limit 5 each). Whether a whole-house carbon model reduces those solvents is on that model's data sheet.
- **Whole-House + Softener Combo** (worth considering): Hardness 80.4 mg/L, about 4.7 grains per gallon. At 80.4 mg/L (4.7 gpg) the water is moderately hard. A softener is a comfort choice here, not a necessity.

## Test your own water

A utility report describes the supply, not your tap, and does not cover private wells. Fieldstone Water Co. offers a free in-home water test across Long Island: call 516-43WATER (516-439-2837) or book at https://www.fieldstonewater.com/free-water-test.

---
Compilation © Fieldstone Water Co., licensed CC BY 4.0 (the underlying public records are not ours to copyright): reuse with attribution and a link to https://www.fieldstonewater.com/water/east-meadow, keeping each figure's source citation. Text and explainers all rights reserved. https://www.fieldstonewater.com/terms#data-license
