# Water quality in Fishers Island, NY (Suffolk County)

- Water source: Private wells
- Supplier / district: Private wells
- Data status: no public supplier mapped (private wells); no published figures
- Web page: https://www.fieldstonewater.com/water/fishers-island
- JSON: https://www.fieldstonewater.com/api/v1/towns/fishers-island

No public water system is mapped to this community in EPA records, so there is no published water quality report for it. Private wells are tested only when the owner tests them. None of Fishers Island's land lies inside a mapped public water service area, per the NYS Department of Health boundaries EPA publishes; homes here are on private wells.

## Notes on this data

- Public-water figures are annual results published by the water supplier in its Annual Drinking Water Quality Report (CCR), reported across all wells feeding a distribution area. They describe water leaving the supplier, not the tap in a specific home.
- Private wells are not covered by any public report. Well owners need their own test.
- Status compares the reported average (or the range high where no average is published) to the regulatory limit. 'exceeds' is a numeric comparison, not a regulatory violation finding; see violationFlag for what the supplier reported.
- epaSystems lists the public water systems that report serving this community's ZIP codes (EPA UCMR 5 ZIP list) with their EPA SDWIS violation counts. Counts are compliance events, not contaminant levels.
- publicWaterCoverage: share (0-1) of the community's land inside a public water system service area, from the NYS DOH boundaries EPA publishes; >=0.9 is shown as public water, <=0.1 as private wells, between as mixed.
- areaAssignment: 'inferred' means the SCWA distribution area was taken from neighboring mapped communities, not read from SCWA's map; confirm with SCWA's address lookup.
- dataTier: 'report' = rows from the supplier's annual water quality report; 'epa' = EPA-reported lead and PFAS sampling results so far; 'none' = no public supplier mapped (private wells).
- peakAboveLimit marks a contaminant whose highest single sample was above the limit even though its average was not. Compliance is judged on averages; peaks show what some homes may have received at times.
- Units: µg/L = micrograms per liter = parts per billion; mg/L = milligrams per liter = parts per million. ND = not detected.

## What this means for treatment

Fishers Island homes are on private wells with no public water quality report. The right system depends entirely on a test of the well itself.

- **Private Well Treatment** (recommended): No public report covers this community. EPA maps no public water system to Fishers Island, so homes here draw from private wells that no agency tests. Long Island well water most often shows nitrate, iron, hardness and, in places, PFAS or solvents. Test first; a well package is sized to what the test finds.
- **Under-Sink Reverse Osmosis** (worth considering): Drinking-water polish once the well is tested. Reverse osmosis at the kitchen tap reduces dissolved contaminants such as nitrate and PFAS that a sediment or iron filter does not, and is the usual second stage on a Long Island well.

## Test your own water

A utility report describes the supply, not your tap, and does not cover private wells. Fieldstone Water Co. offers a free in-home water test across Long Island: call 516-43WATER (516-439-2837) or book at https://www.fieldstonewater.com/free-water-test.

---
Compilation © Fieldstone Water Co., licensed CC BY 4.0 (the underlying public records are not ours to copyright): reuse with attribution and a link to https://www.fieldstonewater.com/water/fishers-island, keeping each figure's source citation. Text and explainers all rights reserved. https://www.fieldstonewater.com/terms#data-license
