# Water quality in Freeport, NY (Nassau County)

- Water source: Public water
- Supplier / district: Village of Freeport Water Department
- Supplier contact: Village of Freeport Water Department (https://freeportny.com/DocumentCenter/View/14949/2025-Annual-Water-Quality-Report)
- Report year: 2025 · Verified: 2026-11-11
- Web page: https://www.fieldstonewater.com/water/freeport
- JSON: https://www.fieldstonewater.com/api/v1/towns/freeport

Where the report prints both an average and a range, the status column here is judged on the average; where it prints a maximum or a 90th-percentile result, that figure is used. The report carries 1 notice: Iron row in the detected-parameters table prints Violation = Yes (1.1 - 1.1 mg/l, MCL = 0.3). Narrative: 'the Village's water quality meets or exceeds all current Federal, State, and County parameters, except for iron' (p.1); 'The Village of Freeport did not receive any violations from the Nassau County Department of Health (NCDOH) during 2025. The water system was in compliance with applicable State drinking water operating, monitoring, and reporting requirements, with the exception of Iron.' (p.11). No formal Notice of Violation is printed. 93% of Freeport's land lies inside a public water service area (Freeport (Village)), per the NYS Department of Health boundaries EPA publishes. A service area is where mains run; a home inside it can still be on a private well.

## Summary

Reported above a limit: Iron.
Detected: Copper, Copper, Lead, Lead, pH, Sodium, Chloride, Calcium, Corrosivity (LSI), Magnesium, Barium, Nickel, Alkalinity, Calcium hardness, Hardness (total), Total Dissolved Solids, Sulfate, Total Trihalomethanes, Free Chlorine, Gross alpha, Gross beta, Combined Radium 226/228, Uranium, Dibromochloromethane, 1,4-Dioxane.

## Contaminants

| Contaminant | Average | Range | Unit | Limit | Limit source | Status | Peak above limit | Samples |
|---|---|---|---|---|---|---|---|---|
| Copper | 0.084 | ND to 0.084 | mg/L | 1.3 | EPA action level | detected | no | — |
| Copper | 0.067 | 0.067 to 0.011 | mg/L | 1.3 | EPA action level | detected | no | — |
| Lead | 2.7 | 1.0 to 2.7 | µg/L | 15 | EPA action level | detected | no | — |
| Lead | <1.0 | — | µg/L | 15 | EPA action level | detected | no | — |
| pH | 7.9 | 7.8 to 7.9 | Standard Units | — | NYS guidance range 7.5–8.5 | detected | no | — |
| Sodium | 19.8 | 19.1 to 19.8 | mg/L | — | NYS guidance (20 mg/L for sodium-restricted diets) | detected | no | — |
| Chloride | 13.4 | 12.5 to 13.4 | mg/L | 250.0 | NYS secondary standard | detected | no | — |
| Calcium | 1.9 | 1.4 to 1.9 | mg/L | — | No regulatory limit | detected | no | — |
| Iron | 1.1 | 1.1 to 1.1 | mg/L | 0.3 | NYS secondary standard | exceeds | yes | — |
| Corrosivity (LSI) | -2.23 | -2.34 to -2.23 | — | — | No regulatory limit | detected | no | — |
| Magnesium | 0.70 | 0.60 to 0.70 | mg/L | — | No regulatory limit | detected | no | — |
| Barium | 0.0046 | 0.0041 to 0.0046 | mg/L | 2.0 | EPA MCL | detected | no | — |
| Nickel | 0.0048 | 0.0041 to 0.0048 | mg/L | — | No regulatory limit | detected | no | — |
| Alkalinity | 24.3 | 22.0 to 24.3 | mg/L | — | No regulatory limit | detected | no | — |
| Calcium hardness | 4.8 | 3.5 to 4.8 | mg/L | — | No regulatory limit | detected | no | — |
| Hardness (total) | 7.3 | 6.4 to 7.3 | mg/L | — | No regulatory limit | detected | no | — |
| Total Dissolved Solids | 67.0 | 59.0 to 67.0 | mg/L | — | No regulatory limit | detected | no | — |
| Sulfate | 10.2 | 9.4 to 10.2 | mg/L | 250 | NYS secondary standard | detected | no | — |
| Total Trihalomethanes | 67.0 | <0.5 to 67.0 | µg/L | 80 | EPA MCL | detected | no | — |
| Free Chlorine | 1.0 | 0.2 to 1.0 | mg/L | 4 | EPA MRDL | detected | no | — |
| Gross alpha | ND ± 5.72 | — | pCi/L | 15 | EPA MCL | detected | no | — |
| Gross beta | ND ± 4.56 | — | pCi/L | 50 | EPA MCL | detected | no | — |
| Combined Radium 226/228 | ND ± 4.35 | — | pCi/L | 5 | EPA MCL | detected | no | — |
| Uranium | 0.194 | ND to 0.194 | µg/L | 30 | EPA MCL | detected | no | — |
| Dibromochloromethane | 0.85 | <0.5 to 0.85 | µg/L | — | No regulatory limit | detected | no | — |
| 1,4-Dioxane | 0.12 | 0.023 to 0.12 | µg/L | 1 | NYS MCL | detected | no | — |
| PFOA | — | ND to ND | µg/L | 0.01 | NYS MCL | not-detected | no | 6 |
| HFPO-DA | — | ND to ND | µg/L | — | EPA MCL of 0.010 µg/L takes effect 2029; no limit in force | not-detected | no | 6 |
| PFHxS | — | ND to ND | µg/L | — | EPA MCL of 0.010 µg/L takes effect 2029; no limit in force | not-detected | no | 6 |
| PFOS | — | ND to ND | µg/L | 0.01 | NYS MCL | not-detected | no | 6 |
| PFBS | — | ND to ND | µg/L | — | No regulatory limit | not-detected | no | 6 |
| PFNA | — | ND to ND | µg/L | — | EPA MCL of 0.010 µg/L takes effect 2029; no limit in force | not-detected | no | 6 |

## Sources

- Village of Freeport Water Department 2025 Annual Water Quality Report: https://freeportny.com/DocumentCenter/View/14949/2025-Annual-Water-Quality-Report
- EPA UCMR 5 PFAS results, 2023–2025 (entry-point samples): https://www.epa.gov/dwucmr/occurrence-data-unregulated-contaminant-monitoring-rule

## EPA compliance record (suppliers serving this community's ZIP codes)

| System | EPA ID | Violations | Health-based | All time | Window | EPA report |
|---|---|---|---|---|---|---|
| Freeport (Village) | NY2902823 | 0 | 0 | 0 | 2022–2026 | https://echo.epa.gov/detailed-facility-report?fid=NY2902823 |

## Notes on this data

- Public-water figures are annual results published by the water supplier in its Annual Drinking Water Quality Report (CCR), reported across all wells feeding a distribution area. They describe water leaving the supplier, not the tap in a specific home.
- Private wells are not covered by any public report. Well owners need their own test.
- Status compares the reported average (or the range high where no average is published) to the regulatory limit. 'exceeds' is a numeric comparison, not a regulatory violation finding; see violationFlag for what the supplier reported.
- epaSystems lists the public water systems that report serving this community's ZIP codes (EPA UCMR 5 ZIP list) with their EPA SDWIS violation counts. Counts are compliance events, not contaminant levels.
- publicWaterCoverage: share (0-1) of the community's land inside a public water system service area, from the NYS DOH boundaries EPA publishes; >=0.9 is shown as public water, <=0.1 as private wells, between as mixed.
- areaAssignment: 'inferred' means the SCWA distribution area was taken from neighboring mapped communities, not read from SCWA's map; confirm with SCWA's address lookup.
- dataTier: 'report' = rows from the supplier's annual water quality report; 'epa' = EPA-reported lead and PFAS sampling results so far; 'none' = no public supplier mapped (private wells).
- peakAboveLimit marks a contaminant whose highest single sample was above the limit even though its average was not. Compliance is judged on averages; peaks show what some homes may have received at times.
- Units: µg/L = micrograms per liter = parts per billion; mg/L = milligrams per liter = parts per million. ND = not detected.

## What this means for treatment

For Freeport, the numbers point first to whole-house carbon filtration: chlorine residual 1 mg/L.

- **Whole-House Carbon Filtration** (recommended): Chlorine residual 1 mg/L. Free chlorine averaged 1 mg/L at the entry point (limit 4), the residual that gives tap water its pool taste and dries skin and hair.
- **Under-Sink Reverse Osmosis** (worth considering): Drinking-water polish. The supplier's 90th-percentile lead result was 0.0027 mg/L (3 ppb) against the 15 ppb action level. Lead enters water from a home's own service line and fixtures, so the system figure says little about any one house; a filter certified for lead (NSF/ANSI 53) or reverse osmosis at the kitchen tap reduces it at the point you drink.
- **Whole-House + Softener Combo** (not needed): Hardness 7.3 mg/L, about 0.4 grains per gallon. At 7.3 mg/L (0.4 gpg) the water is soft. A softener is not needed.

## Test your own water

A utility report describes the supply, not your tap, and does not cover private wells. Fieldstone Water Co. offers a free in-home water test across Long Island: call 516-43WATER (516-439-2837) or book at https://www.fieldstonewater.com/free-water-test.

---
Compilation © Fieldstone Water Co., licensed CC BY 4.0 (the underlying public records are not ours to copyright): reuse with attribution and a link to https://www.fieldstonewater.com/water/freeport, keeping each figure's source citation. Text and explainers all rights reserved. https://www.fieldstonewater.com/terms#data-license
