# Water quality in Glenwood Landing, NY (Nassau County)

- Water source: Public water
- Supplier / district: Liberty New York Water - Sea Cliff Operations District
- Supplier contact: Liberty New York Water - Sea Cliff Operations District (https://new-york-water.libertyutilities.com/uploads/Sea%20Cliff_CCR.pdf)
- Report year: 2025 · Verified: 2026-11-11
- Web page: https://www.fieldstonewater.com/water/glenwood-landing
- JSON: https://www.fieldstonewater.com/api/v1/towns/glenwood-landing

Where the report prints both an average and a range, the status column here is judged on the average; where it prints a maximum or a 90th-percentile result, that figure is used. The report carries 1 notice: No violation notice printed. Report states the system was in compliance with State operating, monitoring and reporting requirements and had no sample limit violations in 2025; Statistics At-a-Glance prints Violations of Standards: None. 91% of Glenwood Landing's land lies inside a public water service area (Liberty Utilities New York - Sea Cliff and others), per the NYS Department of Health boundaries EPA publishes. A service area is where mains run; a home inside it can still be on a private well.

## Summary

No contaminant averaged above its limit in the reported year.
Detected: Free Chlorine, Total Trihalomethanes, Copper, Gross beta, Uranium, Gross alpha, Barium, Nitrate, Copper, Chloride, Sulfate, Selenium, Zinc, PFOA, PFOS, 1,4-Dioxane, 1,4-Dioxane, Sodium, Iron, Manganese, Nickel, Alkalinity, Calcium hardness, Calcium, Corrosivity (LSI), Hardness (total), Magnesium, pH, Total Dissolved Solids, Turbidity, PFHxS, PFBA, PFHxA, PFBS, 6:2 FTS, PFPeA, Perchlorate.

## Contaminants

| Contaminant | Average | Range | Unit | Limit | Limit source | Status | Peak above limit | Samples |
|---|---|---|---|---|---|---|---|---|
| Free Chlorine | 1.14 | 0.63 to 1.86 | mg/L | 4 | EPA MRDL | detected | no | — |
| Total Trihalomethanes | — | ND to 3.1 | µg/L | 80 | EPA MCL | detected | no | — |
| Copper | 0.48 | 0.046 to 0.960 | mg/L | 1.3 | EPA action level | detected | no | — |
| Lead | ND | ND to 1.50 | µg/L | 15 | EPA action level | not-detected | no | — |
| Gross beta | — | 1.05 to 3.30 | pCi/L | 50 | EPA MCL | detected | no | — |
| Uranium | — | 0.04 to 0.06 | µg/L | 30 | EPA MCL | detected | no | — |
| Gross alpha | — | 0.36 to 0.40 | pCi/L | 15 | EPA MCL | detected | no | — |
| Barium | — | ND to 0.03 | mg/L | 2 | EPA MCL | detected | no | — |
| Nitrate | — | 0.11 to 4.40 | mg/L | 10 | EPA MCL | detected | no | — |
| Copper | — | 0.006 to 0.012 | mg/L | 1.3 | EPA action level | detected | no | — |
| Chloride | 20.7 | 3.3 to 43.8 | mg/L | 250 | NYS secondary standard | detected | no | — |
| Sulfate | — | ND to 19.7 | mg/L | 250 | NYS secondary standard | detected | no | — |
| Selenium | — | ND to 2.0 | µg/L | 50 | EPA MCL | detected | no | — |
| Zinc | — | ND to 0.024 | mg/L | 5 | NYS secondary standard | detected | no | — |
| PFOA | 3.88 | 2.90 to 4.98 | ng/L | 10 | NYS MCL | detected | no | — |
| PFOS | 6.28 | 3.12 to 9.66 | ng/L | 10 | NYS MCL | detected | no | — |
| 1,4-Dioxane | 0.08 | 0.07 to 0.10 | µg/L | 1 | NYS MCL | detected | no | — |
| 1,4-Dioxane | 0.08 | 0.06 to 0.09 | µg/L | 1 | NYS MCL | detected | no | — |
| Sodium | — | 3.5 to 19.2 | mg/L | — | NYS guidance (20 mg/L for sodium-restricted diets) | detected | no | — |
| Iron | — | ND to 0.07 | mg/L | 0.3 | NYS secondary standard | detected | no | — |
| Manganese | — | ND to 0.07 | mg/L | 0.3 | NYS secondary standard | detected | no | — |
| Nickel | — | 0.0007 to 0.001 | mg/L | — | No regulatory limit | detected | no | — |
| Alkalinity | — | 11.7 to 26.1 | mg/L | — | No regulatory limit | detected | no | — |
| Calcium hardness | — | 5.9 to 38.2 | mg/L | — | No regulatory limit | detected | no | — |
| Calcium | — | 2.4 to 15.3 | mg/L | — | No regulatory limit | detected | no | — |
| Corrosivity (LSI) | — | -3.27 to -2.37 | LSI | — | No regulatory limit | detected | no | — |
| Hardness (total) | — | 10.9 to 59.9 | mg/L | — | No regulatory limit | detected | no | — |
| Magnesium | — | 1.2 to 5.3 | mg/L | — | No regulatory limit | detected | no | — |
| pH | — | 7.0 to 8.3 | Units | — | NYS guidance range 7.5–8.5 | detected | no | — |
| Total Dissolved Solids | — | 32 to 123 | mg/L | — | No regulatory limit | detected | no | — |
| Turbidity | — | ND to 1.3 | NTU | — | No regulatory limit | detected | no | — |
| PFHxS | — | ND to 9.2 | ng/L | — | No regulatory limit | detected | no | — |
| PFBA | — | ND to 4.7 | ng/L | — | No regulatory limit | detected | no | — |
| PFHxA | — | ND to 2.7 | ng/L | — | No regulatory limit | detected | no | — |
| PFBS | — | ND to 2.6 | ng/L | — | No regulatory limit | detected | no | — |
| 6:2 FTS | — | ND to 4.8 | ng/L | — | No regulatory limit | detected | no | — |
| PFPeA | — | ND to 3.5 | ng/L | — | No regulatory limit | detected | no | — |
| Perchlorate | — | ND to 4.4 | µg/L | — | No regulatory limit | detected | no | — |
| HFPO-DA | — | ND to ND | µg/L | — | EPA MCL of 0.010 µg/L takes effect 2029; no limit in force | not-detected | no | 4 |
| PFNA | — | ND to ND | µg/L | — | EPA MCL of 0.010 µg/L takes effect 2029; no limit in force | not-detected | no | 4 |

## Sources

- Liberty New York Water - Sea Cliff Operations District 2025 Annual Water Quality Report: https://new-york-water.libertyutilities.com/uploads/Sea%20Cliff_CCR.pdf
- EPA UCMR 5 PFAS results, 2023–2025 (entry-point samples): https://www.epa.gov/dwucmr/occurrence-data-unregulated-contaminant-monitoring-rule

## EPA compliance record (suppliers serving this community's ZIP codes)

| System | EPA ID | Violations | Health-based | All time | Window | EPA report |
|---|---|---|---|---|---|---|
| Liberty Utilities New York - Sea Cliff | NY2902853 | 0 | 0 | 0 | 2022–2026 | https://echo.epa.gov/detailed-facility-report?fid=NY2902853 |

## Notes on this data

- Public-water figures are annual results published by the water supplier in its Annual Drinking Water Quality Report (CCR), reported across all wells feeding a distribution area. They describe water leaving the supplier, not the tap in a specific home.
- Private wells are not covered by any public report. Well owners need their own test.
- Status compares the reported average (or the range high where no average is published) to the regulatory limit. 'exceeds' is a numeric comparison, not a regulatory violation finding; see violationFlag for what the supplier reported.
- epaSystems lists the public water systems that report serving this community's ZIP codes (EPA UCMR 5 ZIP list) with their EPA SDWIS violation counts. Counts are compliance events, not contaminant levels.
- publicWaterCoverage: share (0-1) of the community's land inside a public water system service area, from the NYS DOH boundaries EPA publishes; >=0.9 is shown as public water, <=0.1 as private wells, between as mixed.
- areaAssignment: 'inferred' means the SCWA distribution area was taken from neighboring mapped communities, not read from SCWA's map; confirm with SCWA's address lookup.
- dataTier: 'report' = rows from the supplier's annual water quality report; 'epa' = EPA-reported lead and PFAS sampling results so far; 'none' = no public supplier mapped (private wells).
- peakAboveLimit marks a contaminant whose highest single sample was above the limit even though its average was not. Compliance is judged on averages; peaks show what some homes may have received at times.
- Units: µg/L = micrograms per liter = parts per billion; mg/L = milligrams per liter = parts per million. ND = not detected.

## What this means for treatment

For Glenwood Landing, the numbers point first to under-sink reverse osmosis and whole-house carbon filtration: dissolved contaminants close to their limits.

- **Under-Sink Reverse Osmosis** (recommended): Dissolved contaminants close to their limits. Nitrate averaged 4.4 mg/L (limit 10), moderate but present; reverse osmosis reduces it at the tap. PFOA/PFOS reached 9.66 ng/L (ppt) in at least one sample — under New York's 10 ppt limit but at or above the 4.0 ppt federal MCL, with federal compliance due April 26, 2029. Whether an under-sink reverse osmosis model reduces PFOA or PFOS depends on that model's certification or performance data sheet. Perchlorate was detected up to 4.4 µg/L (limit 18).
- **Whole-House Carbon Filtration** (recommended): Chlorine residual 1.14 mg/L. Free chlorine averaged 1.14 mg/L at the entry point (limit 4), the residual that gives tap water its pool taste and dries skin and hair.
- **Whole-House + Softener Combo** (not needed): Hardness 59.9 mg/L, about 3.5 grains per gallon. At 59.9 mg/L (3.5 gpg) the water is soft. A softener is not needed.

## Test your own water

A utility report describes the supply, not your tap, and does not cover private wells. Fieldstone Water Co. offers a free in-home water test across Long Island: call 516-43WATER (516-439-2837) or book at https://www.fieldstonewater.com/free-water-test.

---
Compilation © Fieldstone Water Co., licensed CC BY 4.0 (the underlying public records are not ours to copyright): reuse with attribution and a link to https://www.fieldstonewater.com/water/glenwood-landing, keeping each figure's source citation. Text and explainers all rights reserved. https://www.fieldstonewater.com/terms#data-license
