# Water quality in Hempstead, NY (Nassau County)

- Water source: Public water
- Supplier / district: Inc. Village of Hempstead Water Department
- Supplier contact: Inc. Village of Hempstead Water Department (https://www.villageofhempstead.org/DocumentCenter/View/16193/WATER-QAULITY-REPORT-2025-ENGLISH)
- Report year: 2025 · Verified: 2026-11-11
- Web page: https://www.fieldstonewater.com/water/hempstead
- JSON: https://www.fieldstonewater.com/api/v1/towns/hempstead

Where the report prints both an average and a range, the status column here is judged on the average; where it prints a maximum or a 90th-percentile result, that figure is used. The report carries 1 notice: No Notice of Violation printed; all rows print Violation = No. 1,4-Dioxane detected at 0.085 - 14.2 ug/l (raw water) vs the NYS MCL of 1 ug/l; the Village operates under a NYSDOH deferral/exemption on enforcement of the 1,4-Dioxane MCL (deferral January 8, 2021; further exemption August 25, 2023) while treatment systems are built. PFOA (ND - 10.9 ng/l) and PFOS (ND - 13.7 ng/l) raw-water maxima exceed the 10 ng/l MCL; interconnection partner (Garden City) is under a PFOA/PFOS deferral. 100% of Hempstead's land lies inside a public water service area (Hempstead (Village) and others), per the NYS Department of Health boundaries EPA publishes. A service area is where mains run; a home inside it can still be on a private well.

## Summary

Reported above a limit: 1,4-Dioxane, PFOA, PFOS.
Detected: Copper, pH, Sodium, Chloride, Free Chlorine, Calcium, Iron, Nitrate, Magnesium, Barium, Nickel, Sulfate, Alkalinity, Calcium hardness, Hardness (total), Total Dissolved Solids, Corrosivity (LSI), Perchlorate, Odor, Toluene, Gross alpha, Gross beta, Combined Radium 226/228, Uranium, PFHxS, PFHpA, PFNA.

## Contaminants

| Contaminant | Average | Range | Unit | Limit | Limit source | Status | Peak above limit | Samples |
|---|---|---|---|---|---|---|---|---|
| Copper | 0.11 | ND to 0.23 | mg/L | 1.3 | EPA action level | detected | no | — |
| Lead | ND | ND to — | µg/L | 15 | EPA action level | not-detected | no | — |
| pH | 7.5 | 7.0 to 7.5 | Units | — | NYS guidance range 7.5–8.5 | detected | no | — |
| Sodium | 38.0 | 22.9 to 38.0 | mg/L | — | NYS guidance (20 mg/L for sodium-restricted diets) | detected | no | — |
| Chloride | 45.4 | 32.4 to 45.4 | mg/L | 250 | NYS secondary standard | detected | no | — |
| Free Chlorine | 1.49 | 0.45 to 1.49 | mg/L | 4 | EPA MRDL | detected | no | — |
| Calcium | 6.9 | 5.2 to 6.9 | mg/L | — | No regulatory limit | detected | no | — |
| Iron | 0.11 | 0.045 to 0.11 | mg/L | 300 | NYS secondary standard | detected | no | — |
| Nitrate | 1.0 | ND to 1.0 | mg/L | 10 | EPA MCL | detected | no | — |
| Magnesium | 3.6 | 3.2 to 3.6 | mg/L | — | No regulatory limit | detected | no | — |
| Barium | 0.0056 | 0.0036 to 0.0056 | mg/L | 2.0 | EPA MCL | detected | no | — |
| Nickel | 0.0053 | 0.0047 to 0.0053 | mg/L | — | No regulatory limit | detected | no | — |
| Sulfate | 22.1 | 15.3 to 22.1 | mg/L | 250 | NYS secondary standard | detected | no | — |
| Alkalinity | 50.9 | 5.7 to 50.9 | mg/L | — | No regulatory limit | detected | no | — |
| Calcium hardness | 17.1 | 12.9 to 17.1 | mg/L | — | No regulatory limit | detected | no | — |
| Hardness (total) | 32.0 | 26.2 to 32.0 | mg/L | — | No regulatory limit | detected | no | — |
| Total Dissolved Solids | 132 | 98 to 132 | mg/L | — | No regulatory limit | detected | no | — |
| Corrosivity (LSI) | -1.73 | -2.44 to -1.73 | — | — | No regulatory limit | detected | no | — |
| Perchlorate | 1.2 | ND to 1.2 | µg/L | 6 | NYS MCL | detected | no | — |
| Odor | 1 | No Odor to 1 | — | 3 | NYS secondary standard | detected | no | — |
| Toluene | 0.53 | ND to 0.53 | µg/L | 500 | EPA MCL | detected | no | — |
| Gross alpha | 3.48+/- | — | pCi/L | 15 | EPA MCL | detected | no | — |
| Gross beta | 4.40+/- | — | pCi/L | 50 | EPA MCL | detected | no | — |
| Combined Radium 226/228 | 3.48+/- | — | pCi/L | 5 | EPA MCL | detected | no | — |
| Uranium | 3.48 | — | µg/L | 30 | EPA MCL | detected | no | — |
| 1,4-Dioxane | 14.2 | 0.085 to 14.2 | µg/L | 1 | NYS MCL | exceeds | yes | — |
| PFOA | 10.9 | ND to 10.9 | ng/L | 10 | NYS MCL | exceeds | yes | — |
| PFOS | 13.7 | ND to 13.7 | ng/L | 10 | NYS MCL | exceeds | yes | — |
| PFHxS | 3.92 | ND to 3.92 | ng/L | — | No regulatory limit | detected | no | — |
| PFHpA | 2.76 | ND to 2.76 | ng/L | — | No regulatory limit | detected | no | — |
| PFNA | 7.09 | ND to 7.09 | ng/L | — | No regulatory limit | detected | no | — |
| HFPO-DA | — | ND to ND | µg/L | — | EPA MCL of 0.010 µg/L takes effect 2029; no limit in force | not-detected | no | 4 |
| PFBS | — | ND to ND | µg/L | — | No regulatory limit | not-detected | no | 4 |

## Sources

- Inc. Village of Hempstead Water Department 2025 Annual Water Quality Report: https://www.villageofhempstead.org/DocumentCenter/View/16193/WATER-QAULITY-REPORT-2025-ENGLISH
- EPA UCMR 5 PFAS results, 2023–2025 (entry-point samples): https://www.epa.gov/dwucmr/occurrence-data-unregulated-contaminant-monitoring-rule

## EPA compliance record (suppliers serving this community's ZIP codes)

| System | EPA ID | Violations | Health-based | All time | Window | EPA report |
|---|---|---|---|---|---|---|
| Hempstead (Village) | NY2902827 | 1 | 0 | 4 | 2022–2026 | https://echo.epa.gov/detailed-facility-report?fid=NY2902827 |

## Notes on this data

- Public-water figures are annual results published by the water supplier in its Annual Drinking Water Quality Report (CCR), reported across all wells feeding a distribution area. They describe water leaving the supplier, not the tap in a specific home.
- Private wells are not covered by any public report. Well owners need their own test.
- Status compares the reported average (or the range high where no average is published) to the regulatory limit. 'exceeds' is a numeric comparison, not a regulatory violation finding; see violationFlag for what the supplier reported.
- epaSystems lists the public water systems that report serving this community's ZIP codes (EPA UCMR 5 ZIP list) with their EPA SDWIS violation counts. Counts are compliance events, not contaminant levels.
- publicWaterCoverage: share (0-1) of the community's land inside a public water system service area, from the NYS DOH boundaries EPA publishes; >=0.9 is shown as public water, <=0.1 as private wells, between as mixed.
- areaAssignment: 'inferred' means the SCWA distribution area was taken from neighboring mapped communities, not read from SCWA's map; confirm with SCWA's address lookup.
- dataTier: 'report' = rows from the supplier's annual water quality report; 'epa' = EPA-reported lead and PFAS sampling results so far; 'none' = no public supplier mapped (private wells).
- peakAboveLimit marks a contaminant whose highest single sample was above the limit even though its average was not. Compliance is judged on averages; peaks show what some homes may have received at times.
- Units: µg/L = micrograms per liter = parts per billion; mg/L = milligrams per liter = parts per million. ND = not detected.

## What this means for treatment

For Hempstead, the numbers point first to under-sink reverse osmosis and whole-house carbon filtration: dissolved contaminants close to their limits.

- **Under-Sink Reverse Osmosis** (recommended): Dissolved contaminants close to their limits. PFOA/PFOS reached 13.7 ng/L (ppt) in at least one sample — above New York's 10 ppt limit and at or above the 4.0 ppt federal MCL, with federal compliance due April 26, 2029. Whether an under-sink reverse osmosis model reduces PFOA or PFOS depends on that model's certification or performance data sheet. Sodium averaged 38 mg/L, above the 20 mg/L level New York flags for sodium-restricted diets. Perchlorate was detected up to 1.2 µg/L (limit 18).
- **Whole-House Carbon Filtration** (recommended): Chlorine residual 1.49 mg/L. Free chlorine averaged 1.49 mg/L at the entry point (limit 4), the residual that gives tap water its pool taste and dries skin and hair.
- **Whole-House + Softener Combo** (not needed): Hardness 32 mg/L, about 1.9 grains per gallon. At 32 mg/L (1.9 gpg) the water is soft. A softener is not needed.

## Test your own water

A utility report describes the supply, not your tap, and does not cover private wells. Fieldstone Water Co. offers a free in-home water test across Long Island: call 516-43WATER (516-439-2837) or book at https://www.fieldstonewater.com/free-water-test.

---
Compilation © Fieldstone Water Co., licensed CC BY 4.0 (the underlying public records are not ours to copyright): reuse with attribution and a link to https://www.fieldstonewater.com/water/hempstead, keeping each figure's source citation. Text and explainers all rights reserved. https://www.fieldstonewater.com/terms#data-license
