# Water quality in Levittown, NY (Nassau County)

- Water source: Public water
- Supplier / district: Liberty New York Water - Merrick Operations District
- Supplier contact: Liberty New York Water - Merrick Operations District (https://new-york-water.libertyutilities.com/uploads/Merrick_CCR.pdf)
- Supplier contact: Town of Hempstead Department of Water (Bowling Green Estates, East Meadow, Levittown, Roosevelt Field and Uniondale Water Districts) (https://hempsteadny.gov/DocumentCenter/View/8536/Water-Quality-Report-All-Districts-2026-PDF) — Also serves part of this community.
- Report year: 2025 · Verified: 2026-11-11
- Web page: https://www.fieldstonewater.com/water/levittown
- JSON: https://www.fieldstonewater.com/api/v1/towns/levittown

Where the report prints both an average and a range, the status column here is judged on the average; where it prints a maximum or a 90th-percentile result, that figure is used. The report carries 1 notice: No violation notice printed. Report states the system was in compliance with State operating, monitoring and reporting requirements and had no sample limit violations in 2025; Statistics At-a-Glance prints Violations of Standards: None. 100% of Levittown's land lies inside a public water service area (Town of Hempstead Water Department and others), per the NYS Department of Health boundaries EPA publishes. A service area is where mains run; a home inside it can still be on a private well.

## Summary

Reported above a limit: Iron.
Individual samples above the limit: Lead (high 19.1 vs limit 15 µg/L); Lead (high 20.0 vs limit 15 µg/L).
Detected: Free Chlorine, Total Trihalomethanes, Copper, Copper, Gross beta, Uranium, Gross alpha, Combined Radium 226/228, Barium, Nitrate, Copper, Lead, Thallium, Chloride, Sulfate, Turbidity, Zinc, 1,4-Dioxane, Sodium, Manganese, Color, Odor, Nickel, Alkalinity, Calcium hardness, Calcium, Corrosivity (LSI), Hardness (total), Magnesium, pH, Total Dissolved Solids, Lithium, Glyoxal.

## Contaminants

| Contaminant | Average | Range | Unit | Limit | Limit source | Status | Peak above limit | Samples |
|---|---|---|---|---|---|---|---|---|
| Free Chlorine | 1.29 | 0.52 to 2.18 | mg/L | 4 | EPA MRDL | detected | no | — |
| Total Trihalomethanes | 3.95 | ND to 5.5 | µg/L | 80 | EPA MCL | detected | no | — |
| Copper | 0.32 | 0.02 to 1.3 | mg/L | 1.3 | EPA action level | detected | no | — |
| Lead | ND | ND to 19.1 | µg/L | 15 | EPA action level | not-detected | yes | — |
| Copper | 0.20 | 0.004 to 0.42 | mg/L | 1.3 | EPA action level | detected | no | — |
| Lead | ND | ND to 20.0 | µg/L | 15 | EPA action level | not-detected | yes | — |
| Gross beta | — | 0.22 to 2.95 | pCi/L | 50 | EPA MCL | detected | no | — |
| Uranium | — | ND to 0.05 | µg/L | 30 | EPA MCL | detected | no | — |
| Gross alpha | — | ND to 2.78 | pCi/L | 15 | EPA MCL | detected | no | — |
| Combined Radium 226/228 | — | ND to 1.46 | pCi/L | 5 | EPA MCL | detected | no | — |
| Barium | — | ND to 0.007 | mg/L | 2 | EPA MCL | detected | no | — |
| Nitrate | — | ND to 0.06 | mg/L | 10 | EPA MCL | detected | no | — |
| Copper | — | ND to 0.05 | mg/L | 1.3 | EPA action level | detected | no | — |
| Lead | 0.72 | ND to 15 | µg/L | 15 | EPA action level | detected | no | — |
| Thallium | 0.10 | ND to 0.40 | µg/L | 2 | EPA MCL | detected | no | — |
| Chloride | 9.7 | 3.1 to 20.6 | mg/L | 250 | NYS secondary standard | detected | no | — |
| Sulfate | — | ND to 24.3 | mg/L | 250 | NYS secondary standard | detected | no | — |
| Turbidity | — | ND to 1.0 | NTU | 5 | EPA MCL | detected | no | — |
| Zinc | — | ND to 0.06 | mg/L | 5 | NYS secondary standard | detected | no | — |
| 1,4-Dioxane | — | ND to 0.38 | µg/L | 1 | NYS MCL | detected | no | — |
| Sodium | — | 2.7 to 42.9 | mg/L | — | NYS guidance (20 mg/L for sodium-restricted diets) | detected | no | — |
| Iron | — | ND to 1.4 | mg/L | 0.3 | NYS secondary standard | exceeds | yes | — |
| Manganese | — | ND to 0.05 | mg/L | 0.3 | NYS secondary standard | detected | no | — |
| Color | — | ND to 13 | Units | 15 | NYS secondary standard | detected | no | — |
| Odor | — | ND to 2 | Units | 3 | NYS secondary standard | detected | no | — |
| Nickel | — | 0.002 to 0.006 | mg/L | — | No regulatory limit | detected | no | — |
| Alkalinity | — | ND to 52.6 | mg/L | — | No regulatory limit | detected | no | — |
| Calcium hardness | — | 0.51 to 11.8 | mg/L | — | No regulatory limit | detected | no | — |
| Calcium | — | 0.21 to 4.7 | mg/L | — | No regulatory limit | detected | no | — |
| Corrosivity (LSI) | — | -7.15 to -2.26 | LSI | — | No regulatory limit | detected | no | — |
| Hardness (total) | — | 1.6 to 19.3 | mg/L | — | No regulatory limit | detected | no | — |
| Magnesium | — | ND to 2.0 | mg/L | — | No regulatory limit | detected | no | — |
| pH | — | 6.88 to 8.11 | Units | — | NYS guidance range 7.5–8.5 | detected | no | — |
| Total Dissolved Solids | — | ND to 124 | mg/L | — | No regulatory limit | detected | no | — |
| Lithium | — | ND to 139 | µg/L | — | No regulatory limit | detected | no | — |
| Glyoxal | — | ND to 7.6 | µg/L | — | No regulatory limit | detected | no | — |
| HFPO-DA | — | ND to ND | µg/L | — | EPA MCL of 0.010 µg/L takes effect 2029; no limit in force | not-detected | no | 12 |
| PFOA | — | ND to ND | µg/L | 0.01 | NYS MCL | not-detected | no | 12 |
| PFBS | — | ND to ND | µg/L | — | No regulatory limit | not-detected | no | 12 |
| PFHxS | — | ND to ND | µg/L | — | EPA MCL of 0.010 µg/L takes effect 2029; no limit in force | not-detected | no | 12 |
| PFNA | — | ND to ND | µg/L | — | EPA MCL of 0.010 µg/L takes effect 2029; no limit in force | not-detected | no | 12 |
| PFOS | — | ND to ND | µg/L | 0.01 | NYS MCL | not-detected | no | 12 |

## Sources

- Liberty New York Water - Merrick Operations District 2025 Annual Water Quality Report: https://new-york-water.libertyutilities.com/uploads/Merrick_CCR.pdf
- EPA UCMR 5 PFAS results, 2023–2025 (entry-point samples): https://www.epa.gov/dwucmr/occurrence-data-unregulated-contaminant-monitoring-rule

## EPA compliance record (suppliers serving this community's ZIP codes)

| System | EPA ID | Violations | Health-based | All time | Window | EPA report |
|---|---|---|---|---|---|---|
| Liberty Utilities New York - Merrick | NY2902840 | 27 | 3 | 65 | 2022–2026 | https://echo.epa.gov/detailed-facility-report?fid=NY2902840 |
| Town of Hempstead Water Department | NY2900000 | 0 | 0 | 0 | 2022–2026 | https://echo.epa.gov/detailed-facility-report?fid=NY2900000 |

## Notes on this data

- Public-water figures are annual results published by the water supplier in its Annual Drinking Water Quality Report (CCR), reported across all wells feeding a distribution area. They describe water leaving the supplier, not the tap in a specific home.
- Private wells are not covered by any public report. Well owners need their own test.
- Status compares the reported average (or the range high where no average is published) to the regulatory limit. 'exceeds' is a numeric comparison, not a regulatory violation finding; see violationFlag for what the supplier reported.
- epaSystems lists the public water systems that report serving this community's ZIP codes (EPA UCMR 5 ZIP list) with their EPA SDWIS violation counts. Counts are compliance events, not contaminant levels.
- publicWaterCoverage: share (0-1) of the community's land inside a public water system service area, from the NYS DOH boundaries EPA publishes; >=0.9 is shown as public water, <=0.1 as private wells, between as mixed.
- areaAssignment: 'inferred' means the SCWA distribution area was taken from neighboring mapped communities, not read from SCWA's map; confirm with SCWA's address lookup.
- dataTier: 'report' = rows from the supplier's annual water quality report; 'epa' = EPA-reported lead and PFAS sampling results so far; 'none' = no public supplier mapped (private wells).
- peakAboveLimit marks a contaminant whose highest single sample was above the limit even though its average was not. Compliance is judged on averages; peaks show what some homes may have received at times.
- Units: µg/L = micrograms per liter = parts per billion; mg/L = milligrams per liter = parts per million. ND = not detected.

## What this means for treatment

For Levittown, the numbers point first to whole-house carbon filtration: chlorine residual 1.29 mg/L.

- **Whole-House Carbon Filtration** (recommended): Chlorine residual 1.29 mg/L. Free chlorine averaged 1.29 mg/L at the entry point (limit 4), the residual that gives tap water its pool taste and dries skin and hair.
- **Under-Sink Reverse Osmosis** (worth considering): Drinking-water polish. Sodium averaged 42.9 mg/L, above the 20 mg/L level New York flags for sodium-restricted diets.
- **Whole-House + Softener Combo** (not needed): Hardness 19.3 mg/L, about 1.1 grains per gallon. At 19.3 mg/L (1.1 gpg) the water is soft. A softener is not needed.

## Test your own water

A utility report describes the supply, not your tap, and does not cover private wells. Fieldstone Water Co. offers a free in-home water test across Long Island: call 516-43WATER (516-439-2837) or book at https://www.fieldstonewater.com/free-water-test.

---
Compilation © Fieldstone Water Co., licensed CC BY 4.0 (the underlying public records are not ours to copyright): reuse with attribution and a link to https://www.fieldstonewater.com/water/levittown, keeping each figure's source citation. Text and explainers all rights reserved. https://www.fieldstonewater.com/terms#data-license
