# Water quality in Massapequa Park, NY (Nassau County)

- Water source: Public water
- Supplier / district: Massapequa Water District
- Supplier contact: Massapequa Water District (https://massapequawater.com/wp-content/uploads/2026/04/2025-MPWD-Drinking-Water-Quality-Report-FINAL1.pdf) — Serves this community per the NYS DOH service-area boundary EPA publishes.
- Report year: 2025 · Verified: 2026-11-11
- Web page: https://www.fieldstonewater.com/water/massapequa-park
- JSON: https://www.fieldstonewater.com/api/v1/towns/massapequa-park

Where the report prints both an average and a range, the status column here is judged on the average; where it prints a maximum or a 90th-percentile result, that figure is used. Massapequa Water District's report does not name Massapequa Park in its service area. The service-area boundary the NYS Department of Health supplies to EPA places most of Massapequa Park inside the district (https://www.epa.gov/ground-water-and-drinking-water/community-water-system-service-area-boundaries). That mapping is not in the report. The report carries 1 notice: No violations reported. Page 1: 'The Board of Commissioners is happy to report that our water is in full compliance with all Federal, State, and County regulations and that no violations exist.' All rows in the table show Violation 'No' (Iron 'No(3)'). No Notice of Violation is printed. 98% of Massapequa Park's land lies inside a public water service area (Massapequa Water District), per the NYS Department of Health boundaries EPA publishes. A service area is where mains run; a home inside it can still be on a private well.

## Summary

Reported above a limit: Iron.
Detected: Copper, Barium, Sodium, Zinc, Chloride, Beryllium, Manganese, Nickel, Sulfate, Magnesium, Calcium, Gross alpha, Gross beta, Combined Radium 226/228, Uranium, Total Trihalomethanes, Bromodichloromethane, Dibromochloromethane, 1,4-Dioxane, Free Chlorine, pH, Alkalinity, Calcium hardness, Odor, Hardness (total), Total Dissolved Solids, Turbidity.

## Contaminants

| Contaminant | Average | Range | Unit | Limit | Limit source | Status | Peak above limit | Samples |
|---|---|---|---|---|---|---|---|---|
| Copper | 0.140 | ND to 0.90 | mg/L | 1.3 | EPA action level | detected | no | — |
| Lead | ND | ND to 2.8 | µg/L | 15 | EPA action level | not-detected | no | — |
| Barium | 0.01 | ND to 0.01 | mg/L | 2 | EPA MCL | detected | no | — |
| Sodium | 31.3 | 2.7 to 31.3 | mg/L | — | NYS guidance (20 mg/L for sodium-restricted diets) | detected | no | — |
| Zinc | 0.094 | ND to 0.094 | mg/L | 5 | NYS secondary standard | detected | no | — |
| Chloride | 26.9 | 3.6 to 26.9 | mg/L | 250 | NYS secondary standard | detected | no | — |
| Beryllium | 0.33 | ND to 0.33 | µg/L | 4 | EPA MCL | detected | no | — |
| Iron | 1400 | 26.2 to 1400 | µg/L | 300 | NYS secondary standard | exceeds | yes | — |
| Manganese | 73.0 | ND to 73.0 | µg/L | 300 | NYS secondary standard | detected | no | — |
| Nickel | 7.8 | 1.0 to 7.8 | µg/L | — | No regulatory limit | detected | no | — |
| Sulfate | 10.4 | ND to 10.4 | mg/L | 250 | NYS secondary standard | detected | no | — |
| Magnesium | 2.3 | 0.22 to 2.3 | mg/L | — | No regulatory limit | detected | no | — |
| Calcium | 2.9 | 0.23 to 2.9 | mg/L | — | No regulatory limit | detected | no | — |
| Gross alpha | 0.986 | ND to 0.986 | pCi/L | 15 | EPA MCL | detected | no | — |
| Gross beta | 2.96 | 0.056 to 2.96 | pCi/L | 4 | EPA MCL | detected | no | — |
| Combined Radium 226/228 | 1.513 | 0.269 to 1.513 | pCi/L | 5 | EPA MCL | detected | no | — |
| Uranium | 0.493 | ND to 0.493 | µg/L | 30 | EPA MCL | detected | no | — |
| Total Trihalomethanes | 1.7 | ND to 1.7 | µg/L | 80 | EPA MCL | detected | no | — |
| Bromodichloromethane | 0.9 | ND to 0.9 | µg/L | 50 | EPA MCL | detected | no | — |
| Dibromochloromethane | 0.76 | ND to 0.76 | µg/L | 50 | EPA MCL | detected | no | — |
| 1,4-Dioxane | 0.086 | ND to 0.086 | µg/L | 1.0 | NYS MCL | detected | no | — |
| Free Chlorine | 1.3 | 0.3 to 1.3 | mg/L | 4.0 | EPA MRDL | detected | no | — |
| pH | 8.3 | 4.3 to 8.3 | Units | — | NYS guidance range 7.5–8.5 | detected | no | — |
| Alkalinity | 46.8 | ND to 46.8 | mg/L | — | No regulatory limit | detected | no | — |
| Calcium hardness | 7.2 | 0.58 to 7.2 | mg/L | — | No regulatory limit | detected | no | — |
| Odor | 2.0 | ND to 2.0 | Units | — | No regulatory limit | detected | no | — |
| Hardness (total) | 16.7 | 1.5 to 16.7 | mg/L | — | No regulatory limit | detected | no | — |
| Total Dissolved Solids | 87.0 | ND to 87.0 | mg/L | — | No regulatory limit | detected | no | — |
| Turbidity | 1.0 | ND to 1.0 | NTU | — | No regulatory limit | detected | no | — |
| PFNA | — | ND to ND | µg/L | — | EPA MCL of 0.010 µg/L takes effect 2029; no limit in force | not-detected | no | 18 |
| PFOS | — | ND to ND | µg/L | 0.01 | NYS MCL | not-detected | no | 18 |
| PFHxS | — | ND to ND | µg/L | — | EPA MCL of 0.010 µg/L takes effect 2029; no limit in force | not-detected | no | 18 |
| PFBS | — | ND to ND | µg/L | — | No regulatory limit | not-detected | no | 18 |
| PFOA | — | ND to ND | µg/L | 0.01 | NYS MCL | not-detected | no | 18 |
| HFPO-DA | — | ND to ND | µg/L | — | EPA MCL of 0.010 µg/L takes effect 2029; no limit in force | not-detected | no | 18 |

## Sources

- Massapequa Water District 2025 Annual Water Quality Report: https://massapequawater.com/wp-content/uploads/2026/04/2025-MPWD-Drinking-Water-Quality-Report-FINAL1.pdf
- EPA UCMR 5 PFAS results, 2023–2025 (entry-point samples): https://www.epa.gov/dwucmr/occurrence-data-unregulated-contaminant-monitoring-rule

## EPA compliance record (suppliers serving this community's ZIP codes)

| System | EPA ID | Violations | Health-based | All time | Window | EPA report |
|---|---|---|---|---|---|---|
| South Farmingdale Water District | NY2902854 | 0 | 0 | 0 | 2022–2026 | https://echo.epa.gov/detailed-facility-report?fid=NY2902854 |
| Massapequa Water District | NY2902837 | 0 | 0 | 2 | 2022–2026 | https://echo.epa.gov/detailed-facility-report?fid=NY2902837 |

## Notes on this data

- Public-water figures are annual results published by the water supplier in its Annual Drinking Water Quality Report (CCR), reported across all wells feeding a distribution area. They describe water leaving the supplier, not the tap in a specific home.
- Private wells are not covered by any public report. Well owners need their own test.
- Status compares the reported average (or the range high where no average is published) to the regulatory limit. 'exceeds' is a numeric comparison, not a regulatory violation finding; see violationFlag for what the supplier reported.
- epaSystems lists the public water systems that report serving this community's ZIP codes (EPA UCMR 5 ZIP list) with their EPA SDWIS violation counts. Counts are compliance events, not contaminant levels.
- publicWaterCoverage: share (0-1) of the community's land inside a public water system service area, from the NYS DOH boundaries EPA publishes; >=0.9 is shown as public water, <=0.1 as private wells, between as mixed.
- areaAssignment: 'inferred' means the SCWA distribution area was taken from neighboring mapped communities, not read from SCWA's map; confirm with SCWA's address lookup.
- dataTier: 'report' = rows from the supplier's annual water quality report; 'epa' = EPA-reported lead and PFAS sampling results so far; 'none' = no public supplier mapped (private wells).
- peakAboveLimit marks a contaminant whose highest single sample was above the limit even though its average was not. Compliance is judged on averages; peaks show what some homes may have received at times.
- Units: µg/L = micrograms per liter = parts per billion; mg/L = milligrams per liter = parts per million. ND = not detected.

## What this means for treatment

For Massapequa Park, the numbers point first to whole-house carbon filtration and private well treatment: chlorine residual 1.3 mg/L.

- **Whole-House Carbon Filtration** (recommended): Chlorine residual 1.3 mg/L. Free chlorine averaged 1.3 mg/L at the entry point (limit 4), the residual that gives tap water its pool taste and dries skin and hair. Chlorination by-products (trihalomethanes) reached 0.9 µg/L in some samples against an 80 µg/L limit for the group; they are absorbed in the shower as well as drunk.
- **Private Well Treatment** (recommended): Iron up to 1400 µg/L in some wells. Iron peaked at 1400 µg/L (average 1400) against the 300 µg/L standard: orange staining on fixtures and laundry in the homes that get it. On a public supply this calls for an iron filter, the same oxidizing equipment used in a well package, only if you see the staining.
- **Under-Sink Reverse Osmosis** (worth considering): Drinking-water polish. Sodium averaged 31.3 mg/L, above the 20 mg/L level New York flags for sodium-restricted diets.
- **Whole-House + Softener Combo** (not needed): Hardness 16.7 mg/L, about 1.0 grains per gallon. At 16.7 mg/L (1.0 gpg) the water is soft. A softener is not needed.

## Test your own water

A utility report describes the supply, not your tap, and does not cover private wells. Fieldstone Water Co. offers a free in-home water test across Long Island: call 516-43WATER (516-439-2837) or book at https://www.fieldstonewater.com/free-water-test.

---
Compilation © Fieldstone Water Co., licensed CC BY 4.0 (the underlying public records are not ours to copyright): reuse with attribution and a link to https://www.fieldstonewater.com/water/massapequa-park, keeping each figure's source citation. Text and explainers all rights reserved. https://www.fieldstonewater.com/terms#data-license
