# Water quality in Old Bethpage, NY (Nassau County)

- Water source: Public water
- Supplier / district: Plainview Water District
- Supplier contact: Plainview Water District (https://plainviewwater.org/wp-content/uploads/2026/05/26.04.21-2025-PLWD-Drinking-Water-Quality-Report-FINAL1.pdf)
- Report year: 2025 · Verified: 2026-11-11
- Web page: https://www.fieldstonewater.com/water/old-bethpage
- JSON: https://www.fieldstonewater.com/api/v1/towns/old-bethpage

Where the report prints both an average and a range, the status column here is judged on the average; where it prints a maximum or a 90th-percentile result, that figure is used. The report carries 1 notice: No violations reported: 'We are pleased to report that our drinking water meets all Federal and State requirements.' (page 2). All table rows print Violation 'No'. Footnote (9): initial point-of-entry 1,4-dioxane result of 1.4 ug/L at Well No. 1-2 averaged down to 0.7 ug/L following a resample of ND. Footnote (2): initial color result of 22 units at Well No. 5-2 averaged down to 11 units following a resample of ND. 100% of Old Bethpage's land lies inside a public water service area (Plainview Water District and others), per the NYS Department of Health boundaries EPA publishes. A service area is where mains run; a home inside it can still be on a private well.

## Summary

Reported above a limit: Combined Radium 226/228.
Detected: Copper, Copper, Barium, Calcium, Chloride, Iron, Manganese, Magnesium, Nickel, Sulfate, Sodium, Zinc, Ammonia (as N), Nitrate, Nitrate-Nitrite (as N), Nitrite, Turbidity, Thallium, Perchlorate, 1,1-Dichloroethane, 1,1,1-Trichloroethane, Chlorate, Total Trihalomethanes, Gross alpha, Gross beta, Uranium, Free Chlorine, Formaldehyde, pH, Hardness (total), Calcium hardness, Alkalinity, Total Dissolved Solids, Odor, Color, 1,4-Dioxane, PFOA, PFBA, PFHxA, PFPeA.

## Contaminants

| Contaminant | Average | Range | Unit | Limit | Limit source | Status | Peak above limit | Samples |
|---|---|---|---|---|---|---|---|---|
| Copper | 0.20 | ND to 0.4 | mg/L | 1.3 | EPA action level | detected | no | — |
| Lead | ND | ND to 2.5 | µg/L | 15 | EPA action level | not-detected | no | — |
| Copper | 0.016 | ND to 0.016 | mg/L | 1.3 | EPA action level | detected | no | — |
| Barium | 0.059 | 0.004 to 0.059 | mg/L | 2 | EPA MCL | detected | no | — |
| Calcium | 66.8 | 2.2 to 66.8 | mg/L | — | No regulatory limit | detected | no | — |
| Chloride | 40.5 | 11.9 to 40.5 | mg/L | 250 | NYS secondary standard | detected | no | — |
| Iron | 0.23 | ND to 0.23 | mg/L | 300 | NYS secondary standard | detected | no | — |
| Manganese | 0.094 | ND to 0.094 | mg/L | 300 | NYS secondary standard | detected | no | — |
| Magnesium | 3.1 | 1.2 to 3.1 | mg/L | — | No regulatory limit | detected | no | — |
| Nickel | 0.014 | 0.0013 to 0.014 | mg/L | — | No regulatory limit | detected | no | — |
| Sulfate | 11.4 | ND to 11.4 | mg/L | 250 | NYS secondary standard | detected | no | — |
| Sodium | 13.9 | 6.5 to 13.9 | mg/L | — | NYS guidance (20 mg/L for sodium-restricted diets) | detected | no | — |
| Zinc | 0.025 | ND to 0.025 | mg/L | 5 | NYS secondary standard | detected | no | — |
| Ammonia (as N) | 2.9 | ND to 2.9 | mg/L | — | No regulatory limit | detected | no | — |
| Nitrate | 8.4 | 0.66 to 8.4 | mg/L | 10 | EPA MCL | detected | no | — |
| Nitrate-Nitrite (as N) | 8.5 | 0.68 to 8.5 | mg/L | 10 | EPA MCL | detected | no | — |
| Nitrite | 0.1 | ND to 0.1 | mg/L | 1 | EPA MCL | detected | no | — |
| Turbidity | 3.8 | ND to 3.8 | NTU | 5 | EPA MCL | detected | no | — |
| Thallium | 0.45 | ND to 0.45 | µg/L | 2 | EPA MCL | detected | no | — |
| Perchlorate | 5.8 | ND to 5.8 | µg/L | 18 | NYS MCL | detected | no | — |
| 1,1-Dichloroethane | 3.6 | ND to 3.6 | µg/L | 5 | EPA MCL | detected | no | — |
| 1,1,1-Trichloroethane | 1.8 | ND to 1.8 | µg/L | 5 | EPA MCL | detected | no | — |
| Chlorate | 18.5 | ND to 18.5 | µg/L | — | No regulatory limit | detected | no | — |
| Total Trihalomethanes | 1.3 | ND to 1.3 | µg/L | 80 | EPA MCL | detected | no | — |
| Gross alpha | 3.23 | ND to 3.23 | pCi/L | 15 | EPA MCL | detected | no | — |
| Gross beta | 4.76 | 0.11 to 4.76 | pCi/L (6) | 50 | EPA MCL | detected | no | — |
| Combined Radium 226/228 | 5.45 | 3.03 to 5.45 | pCi/L | 5 | EPA MCL | exceeds | yes | — |
| Uranium | 1.62 | ND to 1.62 | µg/L | 30 | EPA MCL | detected | no | — |
| Free Chlorine | 1.03 | 0.57 to 1.03 | mg/L | 4.0 | EPA MRDL | detected | no | — |
| Formaldehyde | 5.5 | ND to 5.5 | µg/L | 50 | EPA MCL | detected | no | — |
| pH | 8.3 | 4.4 to 8.3 | Units | — | NYS guidance range 7.5–8.5 | detected | no | — |
| Hardness (total) | 180.0 | 10.3 to 180.0 | mg/L | — | No regulatory limit | detected | no | — |
| Calcium hardness | 167.0 | 5.6 to 167.0 | mg/L | — | No regulatory limit | detected | no | — |
| Alkalinity | 123.0 | ND to 123.0 | mg/L | — | No regulatory limit | detected | no | — |
| Total Dissolved Solids | 274.0 | 27.0 to 274.0 | mg/L | — | No regulatory limit | detected | no | — |
| Odor | 2.0 | ND to 2.0 | Units | 3 | NYS secondary standard | detected | no | — |
| Color | 8.0 | ND to 8.0 | Units | 15 | NYS secondary standard | detected | no | — |
| 1,4-Dioxane | 0.61 | ND to 0.61 | µg/L | 1.0 | NYS MCL | detected | no | — |
| PFOA | 3.27 | ND to 3.27 | ng/L | 10 | NYS MCL | detected | no | — |
| PFBA | 18.6 | ND to 18.6 | ng/L | — | No regulatory limit | detected | no | — |
| PFHxA | 2.02 | ND to 2.02 | ng/L | — | No regulatory limit | detected | no | — |
| PFPeA | 2.06 | ND to 2.06 | ng/L | — | No regulatory limit | detected | no | — |

## Sources

- Plainview Water District 2025 Annual Water Quality Report: https://plainviewwater.org/wp-content/uploads/2026/05/26.04.21-2025-PLWD-Drinking-Water-Quality-Report-FINAL1.pdf

## Notes on this data

- Public-water figures are annual results published by the water supplier in its Annual Drinking Water Quality Report (CCR), reported across all wells feeding a distribution area. They describe water leaving the supplier, not the tap in a specific home.
- Private wells are not covered by any public report. Well owners need their own test.
- Status compares the reported average (or the range high where no average is published) to the regulatory limit. 'exceeds' is a numeric comparison, not a regulatory violation finding; see violationFlag for what the supplier reported.
- epaSystems lists the public water systems that report serving this community's ZIP codes (EPA UCMR 5 ZIP list) with their EPA SDWIS violation counts. Counts are compliance events, not contaminant levels.
- publicWaterCoverage: share (0-1) of the community's land inside a public water system service area, from the NYS DOH boundaries EPA publishes; >=0.9 is shown as public water, <=0.1 as private wells, between as mixed.
- areaAssignment: 'inferred' means the SCWA distribution area was taken from neighboring mapped communities, not read from SCWA's map; confirm with SCWA's address lookup.
- dataTier: 'report' = rows from the supplier's annual water quality report; 'epa' = EPA-reported lead and PFAS sampling results so far; 'none' = no public supplier mapped (private wells).
- peakAboveLimit marks a contaminant whose highest single sample was above the limit even though its average was not. Compliance is judged on averages; peaks show what some homes may have received at times.
- Units: µg/L = micrograms per liter = parts per billion; mg/L = milligrams per liter = parts per million. ND = not detected.

## What this means for treatment

For Old Bethpage, the numbers point first to under-sink reverse osmosis, whole-house carbon filtration, and whole-house + softener combo: dissolved contaminants close to their limits.

- **Under-Sink Reverse Osmosis** (recommended): Dissolved contaminants close to their limits. Nitrate averaged 8.4 mg/L with samples up to 8.4 against a 10 mg/L limit — the closest number to its limit here. It passes straight through carbon; reverse osmosis is designed to reduce it at the tap. PFOA/PFOS reached 3.27 ng/L (ppt) in at least one sample — under New York's 10 ppt limit. Whether an under-sink reverse osmosis model reduces PFOA or PFOS depends on that model's certification or performance data sheet. Perchlorate was detected up to 5.8 µg/L (limit 18).
- **Whole-House Carbon Filtration** (recommended): Solvent traces and chlorine in the supply. Free chlorine averaged 1.03 mg/L at the entry point (limit 4), the residual that gives tap water its pool taste and dries skin and hair. Solvent traces were detected: 1,1,1-Trichloroethane up to 1.8 µg/L (limit 5 each). Whether a whole-house carbon model reduces those solvents is on that model's data sheet.
- **Whole-House + Softener Combo** (recommended): Hardness 180 mg/L, about 10.5 grains per gallon. At 180 mg/L (10.5 gpg) this is hard water: it scales water heaters, spots glassware and leaves film on skin. A softener paired with carbon is the standard fix above 7 grains.

## Test your own water

A utility report describes the supply, not your tap, and does not cover private wells. Fieldstone Water Co. offers a free in-home water test across Long Island: call 516-43WATER (516-439-2837) or book at https://www.fieldstonewater.com/free-water-test.

---
Compilation © Fieldstone Water Co., licensed CC BY 4.0 (the underlying public records are not ours to copyright): reuse with attribution and a link to https://www.fieldstonewater.com/water/old-bethpage, keeping each figure's source citation. Text and explainers all rights reserved. https://www.fieldstonewater.com/terms#data-license
