# Water quality in Smithtown, NY (Suffolk County)

- Water source: Public water
- Supplier / district: Smithtown Water District (SCWA-supplied)
- Supplier contact: Smithtown Water District (https://www.smithtownny.gov/198/Smithtown-Water-District, (631) 269-9202) — Portions of Smithtown, Kings Park, Commack, and Hauppauge.
- Supplier contact: Suffolk County Water Authority (https://www.scwa.com, (631) 698-9500) — Parts of Commack, Hauppauge, and Kings Park directly; source supplier for the Smithtown Water District.
- Report year: 2025 · Verified: 2026-09-14
- Web page: https://www.fieldstonewater.com/water/smithtown
- JSON: https://www.fieldstonewater.com/api/v1/towns/smithtown

96% of Smithtown's land lies inside a public water service area (Suffolk County Water Authority and others), per the NYS Department of Health boundaries EPA publishes. A service area is where mains run; a home inside it can still be on a private well.

## Summary

No contaminant averaged above its limit in the reported year.
Detected: Lead, Copper, Nitrate, Barium, Chloride, Manganese, Cyanide, Chloroform, Bromodichloromethane, Dibromochloromethane, Bromoform, Total Trihalomethanes, Total Haloacetic Acids, Dibromoacetic Acid, Dichloroacetic Acid, Chlorate, Free Chlorine, Hardness (total), Calcium Hardness, Specific Conductance, Sodium, pH.

## Contaminants

| Contaminant | Average | Range | Unit | Limit | Limit source | Status | Peak above limit | Samples |
|---|---|---|---|---|---|---|---|---|
| Lead | 1.2 | ND to 8.7 | ug/L | 15 | EPA action level | detected | no | 32 |
| Copper | 0.19 | 0.01 to 0.29 | mg/L | 1.3 | EPA action level | detected | no | 32 |
| Nitrate | — | 1.2 to 3.6 | mg/L | 10 | EPA MCL | detected | no | — |
| Barium | — | 0.009 to 0.023 | mg/L | 2 | EPA MCL | detected | no | — |
| Chloride | — | 15.5 to 20.1 | mg/L | 250 | NYS secondary standard | detected | no | — |
| Manganese | — | ND to 0.01 | ug/L | 300 | NYS secondary standard | detected | no | — |
| Cyanide | — | ND to 20.1 | ug/L | 200 | EPA MCL | detected | no | — |
| Chloroform | — | 0.92 to 3.9 | ug/L | 80 (TTHM sum) | EPA MCL | detected | no | — |
| Bromodichloromethane | — | 0.58 to 4.2 | ug/L | 80 (TTHM sum) | EPA MCL | detected | no | — |
| Dibromochloromethane | — | 0.55 to 2.7 | ug/L | 80 (TTHM sum) | EPA MCL | detected | no | — |
| Bromoform | — | ND to 0.74 | ug/L | 80 (TTHM sum) | EPA MCL | detected | no | — |
| Total Trihalomethanes | — | ND to 2.7 | ug/L | 80 | EPA MCL | detected | no | — |
| Total Haloacetic Acids | — | ND to 2.7 | ug/L | 60 | EPA MCL | detected | no | — |
| Dibromoacetic Acid | — | ND to 1.1 | ug/L | 60 (HAA5 sum) | EPA MCL | detected | no | — |
| Dichloroacetic Acid | — | ND to 1.7 | ug/L | 60 (HAA5 sum) | EPA MCL | detected | no | — |
| Chlorate | — | 74.2 to 77.8 | ug/L | — | No regulatory limit | detected | no | — |
| Free Chlorine | — | 0.39 to 1.12 | mg/L | 4 | EPA MRDL | detected | no | — |
| Hardness (total) | — | 44.6 to 69.4 | mg/L | — | No regulatory limit | detected | no | — |
| Calcium Hardness | — | 34.5 to 57.7 | mg/L | — | No regulatory limit | detected | no | — |
| Specific Conductance | — | 146 to 209 | umhos/cm | — | No regulatory limit | detected | no | — |
| Sodium | — | 10.9 to 13.3 | mg/L | — | No regulatory limit | detected | no | — |
| pH | — | 7.25 to 7.63 | Units | — | No regulatory limit | detected | no | — |

## Sources

- Smithtown Water District 2025 Drinking Water Quality Report: https://www.smithtownny.gov/DocumentCenter/View/9322/260318---2025-SMWD-Drinking-Water-Quality-Report---FINAL1PDF

## EPA compliance record (suppliers serving this community's ZIP codes)

| System | EPA ID | Violations | Health-based | All time | Window | EPA report |
|---|---|---|---|---|---|---|
| Suffolk County Water Authority | NY5110526 | 3 | 0 | 7 | 2022–2026 | https://echo.epa.gov/detailed-facility-report?fid=NY5110526 |
| Smithtown Water District | NY5105656 | 0 | 0 | 0 | 2022–2026 | https://echo.epa.gov/detailed-facility-report?fid=NY5105656 |

## Notes on this data

- Public-water figures are annual results published by the water supplier in its Annual Drinking Water Quality Report (CCR), reported across all wells feeding a distribution area. They describe water leaving the supplier, not the tap in a specific home.
- Private wells are not covered by any public report. Well owners need their own test.
- Status compares the reported average (or the range high where no average is published) to the regulatory limit. 'exceeds' is a numeric comparison, not a regulatory violation finding; see violationFlag for what the supplier reported.
- epaSystems lists the public water systems that report serving this community's ZIP codes (EPA UCMR 5 ZIP list) with their EPA SDWIS violation counts. Counts are compliance events, not contaminant levels.
- publicWaterCoverage: share (0-1) of the community's land inside a public water system service area, from the NYS DOH boundaries EPA publishes; >=0.9 is shown as public water, <=0.1 as private wells, between as mixed.
- areaAssignment: 'inferred' means the SCWA distribution area was taken from neighboring mapped communities, not read from SCWA's map; confirm with SCWA's address lookup.
- dataTier: 'report' = rows from the supplier's annual water quality report; 'epa' = EPA-reported lead and PFAS sampling results so far; 'none' = no public supplier mapped (private wells).
- peakAboveLimit marks a contaminant whose highest single sample was above the limit even though its average was not. Compliance is judged on averages; peaks show what some homes may have received at times.
- Units: µg/L = micrograms per liter = parts per billion; mg/L = milligrams per liter = parts per million. ND = not detected.

## What this means for treatment

For Smithtown, the numbers point first to under-sink reverse osmosis and whole-house carbon filtration: dissolved contaminants close to their limits.

- **Under-Sink Reverse Osmosis** (recommended): Dissolved contaminants close to their limits. Nitrate averaged 3.6 mg/L (limit 10), moderate but present; reverse osmosis reduces it at the tap. The supplier's 90th-percentile lead result was 1.2 mg/L (1200 ppb) against the 15 ppb action level. Lead enters water from a home's own service line and fixtures, so the system figure says little about any one house; a filter certified for lead (NSF/ANSI 53) or reverse osmosis at the kitchen tap reduces it at the point you drink.
- **Whole-House Carbon Filtration** (recommended): Chlorine residual 1.12 mg/L. Free chlorine averaged 1.12 mg/L at the entry point (limit 4), the residual that gives tap water its pool taste and dries skin and hair. Chlorination by-products (trihalomethanes) reached 4.2 µg/L in some samples against an 80 µg/L limit for the group; they are absorbed in the shower as well as drunk.
- **Whole-House + Softener Combo** (worth considering): Hardness 69.4 mg/L, about 4.1 grains per gallon. At 69.4 mg/L (4.1 gpg) the water is moderately hard. A softener is a comfort choice here, not a necessity.

## Test your own water

A utility report describes the supply, not your tap, and does not cover private wells. Fieldstone Water Co. offers a free in-home water test across Long Island: call 516-43WATER (516-439-2837) or book at https://www.fieldstonewater.com/free-water-test.

---
Compilation © Fieldstone Water Co., licensed CC BY 4.0 (the underlying public records are not ours to copyright): reuse with attribution and a link to https://www.fieldstonewater.com/water/smithtown, keeping each figure's source citation. Text and explainers all rights reserved. https://www.fieldstonewater.com/terms#data-license
