Guide · Long Island
Is a Kangen water machine the same as a whole-house filter?
A Kangen-style ionizer and a whole-house filter are different tools. Enagic’s LeveLuk K8 (opens in a new tab) filters tap water, then uses electrolysis to change pH. Changing pH is not the same as reducing a contaminant (opens in a new tab) such as PFAS or nitrate. On Long Island, read your community’s water report, then match it to whole-house filtration or under-sink reverse osmosis.
Published by Fieldstone Water Co.. Last reviewed . Fieldstone does not manufacture equipment. We sell whole-house carbon filtration and under-sink reverse osmosis. Fieldstone sells the equipment only. Installation is done by a licensed plumber you hire and pay directly, under the plumber's own contract. This page makes no health claim for an ionizer, a filter, or reverse osmosis.
Side by side
Three tools, three jobs
The rows below are an alkaline ionizer, whole-house carbon filtration, and under-sink reverse osmosis. “Certified reductions we could verify” means a claim printed in a certifier’s own directory, checked November 13, 2026. Figures that appear only on a manufacturer’s performance data sheet are labeled as that, not as a directory listing.
| Tool | What it does | Certified reductions we could verify | Where it is installed | Typical maintenance |
|---|---|---|---|---|
| Alkaline ionizer, Enagic LeveLuk K8 | Enagic says it filters tap water, then uses electrolysis to produce five water types. The specification table lists pH 2.5–11.5 and eight electrode plates. The same page also says “a pH range from 2.5 to 11.0” and names Strong Acidic water at pH 2.5 or lower, Beauty water at pH 6.0, Clean water at pH 7.0, Kangen Water at pH 8.5–9.5, and Strong Kangen Water at pH 11.0 or higher. | NSF company-name searches for Enagic and for Kangen returned no products. Enagic says the FC1 filter removes chlorine and other contaminants. That is Enagic’s description. The page does not name PFAS. Enagic also says it is certified to ISO 9001, ISO 14001, and ISO 13485 for quality control and environmental management. Those are not drinking-water reduction listings. | The K8 owner’s manual says to install the unit on a kitchen counter and fit a diverter to the faucet. It is a point-of-use machine, not a whole-house system. | Enagic’s K8 page recommends replacing the FC1 filter every six months and describes an automatic self-cleaning cycle. The same page offers a separate Enagic pre-filter “for added protection.” |
| Whole-house carbon filtration | A whole-house carbon filter treats water where it enters the house, so the taps share that treatment. Fieldstone sells this type of equipment. A licensed plumber you hire installs it at the point of entry. Fieldstone does not manufacture it. This page does not name a brand or a certified reduction for it. | We are not citing an NSF, IAPMO, or WQA listing for a specific whole-house carbon model. A reduction claim applies only when a certifier’s directory lists that exact model for that claim. | Whole-house, so treated water reaches the taps in the home. Fieldstone sells the equipment only. Installation is done by a licensed plumber you hire and pay directly, under the plumber's own contract. | Replacement filters and media are sold separately. A licensed plumber you hire does any work on the system. This page does not state a replacement interval, because that depends on the model. |
| Under-sink reverse osmosis | EPA describes reverse osmosis as forcing water through a membrane, with treated drinking water at the tap and a leftover stream to the drain. Fieldstone sells under-sink reverse osmosis. A licensed plumber you hire installs it. This page does not name a brand or a certified reduction for it. | We are not citing an NSF, IAPMO, or WQA listing for a specific under-sink reverse osmosis model. A reduction claim applies only when a certifier’s directory lists that exact model for that claim. | Under the kitchen sink. Fieldstone sells the equipment only. Installation is done by a licensed plumber you hire and pay directly, under the plumber's own contract. | Replacement filters are sold separately. A licensed plumber you hire does any work on the system. This page does not state a replacement interval, because that depends on the model. |
Ionizers
What a water ionizer does
A water ionizer is a point-of-use machine at one faucet. Enagic’s K8 filters tap water, then uses electrolysis to separate it into an alkaline stream and an acidic stream.
Enagic’s LeveLuk K8 page describes one job in two steps. The machine filters tap water. It then uses electrolysis to produce five kinds of water, from acidic to alkaline, including the hydrogen-rich Kangen Water it sells for drinking and cooking. Enagic, LeveLuk K8 (opens in a new tab). The page’s specification table lists eight electrode plates and a pH range of 2.5–11.5. A paragraph on the same page says the range runs from 2.5 to 11.0, and the five named waters are printed as Strong Acidic (pH 2.5 or lower), Beauty (pH 6.0), Clean (pH 7.0), Kangen Water (pH 8.5 to 9.5), and Strong Kangen Water (pH 11.0 or higher). Enagic’s FAQ says Kangen Water at pH 8.5 to 9.5 is intended for daily drinking and cooking, and: “Strong Kangen Water, Beauty Water and Strong Acidic Water are not intended for drinking.”
The filter Enagic names is the FC1. Enagic says it “removes chlorine and other contaminants from tap water before ionization,” with replacement every six months. The owner’s manual calls it an activated-charcoal filter, type FC1, and says to install the machine on a kitchen counter with a diverter on the faucet. Enagic K8 owner’s manual (opens in a new tab). The product page also says to pair the K8 with an Enagic pre-filter for added protection. We did not find a price on the K8 page, so this guide does not state one.
The same specification table lists a negative ORP of −722 mV. ORP, oxidation-reduction potential, is a laboratory measurement of that water sample. Enagic prints the number. It is not a certified reduction of PFAS, lead, nitrate, or 1,4-dioxane, and this page does not treat it as a health benefit. Enagic, LeveLuk K8 specifications (opens in a new tab).
On health: Mayo Clinic Staff, February 20, 2025, write that for most people alkaline water is not better than plain water. Mayo says more research is needed on claims that it prevents disease, including cancer and stroke, and notes safety concerns especially when pH is higher than 9.8, including high blood potassium, particularly for people with kidney disease. Mayo Clinic, alkaline water (opens in a new tab). Fenton and Huang’s 2016 systematic review in BMJ Open screened the literature on dietary acid load, alkaline water, and cancer, found almost no research either supporting or disproving the idea, and concluded that promoting alkaline water for cancer prevention or treatment is not justified. Fenton and Huang, BMJ Open, 2016 (open full text) (opens in a new tab). Be cautious of health claims from any water seller, including us. We are not making one.
Does a Kangen ionizer remove PFAS?
Electrolysis that changes pH is not, by itself, a certified reduction of PFAS, lead, nitrate, or 1,4-dioxane. Those reductions are published as named claims under standards such as NSF/ANSI 53 (health-effect contaminants, including PFAS reduction claims that used to sit in NSF Protocol P473), NSF/ANSI 58 (reverse osmosis), and NSF/ANSI 401 (fifteen emerging contaminants, including pharmaceuticals not yet regulated). NSF, standards for water treatment systems (opens in a new tab). NSF, September 27, 2024, on P473 moving into Standards 53 and 58 (opens in a new tab). EPA tells buyers to look for NSF/ANSI 53 or 58 specifically for PFAS, and lists CSA, IAPMO, NSF, UL, and WQA as certification bodies. EPA also notes that, as of April 2024, those PFAS certifications do not yet show reduction down to the drinking-water limits EPA set in 2024. EPA, filters certified to reduce PFAS (opens in a new tab).
We searched NSF’s drinking water treatment listings for the company name Enagic and, separately, for Kangen. Both pages said the listings were current as of November 12, 2026, and both returned “No Matching Products Found.” NSF listings, company name Enagic (opens in a new tab). NSF listings, company name Kangen (opens in a new tab). A product listed under a different company name, or only at IAPMO or WQA, would not appear in those two searches. Enagic’s page does say the company is certified to ISO 9001, ISO 14001, and ISO 13485 “for quality control and environmental management,” and that it is a member of the Direct Selling Association. Those sentences are about the company’s management certifications and membership, not a drinking-water reduction claim.
Whole-house filtration
What a whole-house filter does
A whole-house filter, also called point-of-entry, treats water where it enters the house, so the taps share that treatment. It is for substances a listing names, such as chlorine under NSF/ANSI 42, and it does not set a chosen alkaline pH.
NSF/ANSI 42 is the standard for aesthetic claims such as chlorine and taste or odor, and it covers both point-of-use and point-of-entry systems. NSF/ANSI 53 covers health-effect claims for the same style of adsorption filter. Certification to a standard does not mean every contaminant is reduced. The listing has to name the contaminant. NSF standards overview (opens in a new tab). NSF’s listings search includes chloramine reduction among the aesthetic claims a shopper can select. NSF drinking water treatment listings (opens in a new tab).
Fieldstone sells whole-house carbon filtration. A licensed plumber you hire installs it. Whole-house filtration. This page does not name a brand for that equipment and does not state a certified reduction or a replacement interval for it. A reduction claim applies only when a certifier’s directory lists that exact model. EPA’s PFAS filter page discusses point-of-use granular activated carbon, ion exchange, and reverse osmosis, and it says those filters work only when they are maintained on the schedule the manufacturer states.
Under-sink reverse osmosis
Is a Kangen ionizer the same as reverse osmosis?
No. Enagic describes the K8 as a machine that filters tap water, then changes pH by electrolysis at one faucet. Reverse osmosis forces water through a membrane. NSF/ANSI 58 is the standard for named reductions on an RO system. The two can sit in one house. They do not do the same job. Enagic, LeveLuk K8 (opens in a new tab). NSF, Standard 58 (opens in a new tab).
What under-sink RO does
Under-sink reverse osmosis is a drinking-water system at the kitchen tap: it pushes water through a membrane and sends a leftover stream to the drain. A model is certified only for the reductions named on its NSF/ANSI 58, IAPMO, or WQA listing.
Reverse osmosis is a drinking-water tool at one faucet. EPA describes it as forcing water through a thin membrane, producing treated water and a stream that goes to the drain, and says cartridges and the membrane have to be changed. NSF/ANSI 58 is the reverse osmosis standard. It is not the standard for whole-house carbon filtration. NSF, Standard 58 (opens in a new tab). Fieldstone sells under-sink reverse osmosis. A licensed plumber you hire installs it. This page does not name a brand or a certified reduction for it. Under-sink reverse osmosis. Fieldstone sells the equipment only. Installation is done by a licensed plumber you hire and pay directly, under the plumber's own contract.
Together
Can you use both?
Yes. They do not compete for the same job. A whole-house carbon filter, installed where water enters the house, treats the showers and the taps. An ionizer on a kitchen counter, connected with a faucet diverter as the K8 manual describes, changes the pH of the water that passes through that faucet. An under-sink reverse osmosis system treats the drinking-water tap. Someone who wants a certified reduction at the kitchen tap and also wants alkaline drinking water can use more than one device. The ionizer does not treat the shower. A whole-house carbon filter does not set a chosen alkaline pH. Start from the water report either way.
How to decide
Alkaline water ionizers on Long Island: start with your water report
Long Island public water is groundwater. The contaminants this site tracks most often are PFOA, PFOS, 1,4-dioxane, nitrate, a chlorine residual, and hardness. The figures below are printed results from 2025 supplier reports, shown with the limit that report prints. They describe the system, not one kitchen tap. Private wells are not in these reports. Private wells have no supplier table. New York’s Department of Health states that the state set maximum contaminant levels of 10 ppt for PFOA and for PFOS, and 1 ppb for 1,4-dioxane, in 2020, and that public systems must meet federal limits of 4 ppt for PFOA and for PFOS by 2029. NYS DOH, PFAS and emerging contaminants (opens in a new tab).
As of November 2026, EPA’s enforceable MCLs for PFOA and PFOS remain 4.0 ppt, with compliance still due April 26, 2029. The April 2024 rule also set MCLs for PFHxS, PFNA, and HFPO-DA (GenX) at 10 ppt and a Hazard Index of 1 for mixtures of those three plus PFBS. NYS DOH notes those additional PFAS are not currently regulated by New York. In May 2026 EPA proposed, but has not finalized, rescinding the additional MCLs and the Hazard Index, and allowing systems that request it to extend PFOA and PFOS compliance from April 26, 2029 to April 26, 2031. EPA, PFAS drinking-water standards (opens in a new tab). EPA, implementation and proposed actions (opens in a new tab). Federal Register, April 26, 2029 compliance date (opens in a new tab). Federal Register, proposed extension to April 26, 2031 (opens in a new tab). Federal Register, proposed rescission (opens in a new tab).
| Supply and substance | Result | Limit in the report | Sample | Source |
|---|---|---|---|---|
| Roslyn, PFOA | ND–7.1 ng/L | 10.0 ppt MCL. The report’s footnote says NYS DOH set 10.0 ppt for PFOA effective August 26, 2020. The row unit is ng/L. | 05/07/25 | Roslyn Water District 2025 annual report (opens in a new tab) |
| Roslyn, PFOS | ND–3.17 ng/L | 10.0 ppt MCL, same footnote | 02/19/25 | Roslyn Water District 2025 annual report, link above |
| Roslyn, 1,4-dioxane | ND–0.55 µg/L | 1.0 µg/L MCL. Footnote: NYS DOH set 1.0 µg/L effective August 26, 2020. | 9/10/25 | Roslyn Water District 2025 annual report, link above |
| Garden City, nitrate | 0.2–6.4 mg/L | 10 mg/L MCL | 06/18/25 | Village of Garden City 2025 drinking water quality report (opens in a new tab) |
| Garden City, chlorine residual | 0.2–1.15 mg/L | 4.0 mg/L MRDL | Continuous, 2025 report | Village of Garden City 2025 report, link above |
| SCWA Distribution Area 1 (the 2026 map’s south-shore area labeled Lindenhurst, Bay Shore, Oakdale, and Sayville; Babylon sits between Lindenhurst and Bay Shore on that map), nitrate | Average 0.79 mg/L, range ND–6.74 mg/L, 422 tests | 10 mg/L | 2025 data, in the 2026 report | SCWA water quality reports (opens in a new tab); 2026 report, full PDF (opens in a new tab); results pages (opens in a new tab) |
| SCWA Area 1, 1,4-dioxane | Average 0.09 µg/L, range ND–0.80 µg/L, 411 tests | 1 µg/L | 2025 data, in the 2026 report | SCWA 2026 report, link above |
| SCWA Area 1, PFOA | Average ND, high 0.003 µg/L, 483 tests. The report prints the name as Perfluorooctanooic Acid. | *0.010 µg/L. Violation column: No. | 2025 data, report page 11 | SCWA 2026 report, link above |
| SCWA Area 1, PFOS | Average ND, high 0.011 µg/L, 483 tests | *0.010 µg/L, which is 10 ppt, New York’s MCL, not the federal 4.0 ppt MCL. The report lists Violation: No. One high result is not itself a violation. Under 10 NYCRR Subpart 5-1.52 Table 3, a sample over the MCL leads the supplier to collect one to three confirming samples from the same point within 30 days. A violation occurs only if a confirming sample is positive and the average of the initial and confirming samples exceeds the MCL. The printed average (ND) is SCWA’s average of all Area 1 samples for the year, not that Table 3 calculation. NYS DOH, Subpart 5-1 tables, Table 3 (opens in a new tab) | 2025 data, report page 11 | SCWA 2026 report, link above |
| SCWA Area 1, free chlorine | Average 0.95 mg/L, range 0.06–1.99 mg/L, 3,867 tests | 4 mg/L | 2025 data, in the 2026 report | SCWA 2026 report, link above |
| SCWA Area 1, total hardness | Average 36.5 mg/L, range 2.2–178.9 mg/L, 1,054 tests | None printed (n/a) | 2025 data, in the 2026 report | SCWA 2026 report, link above |
| Water Authority of Western Nassau, total hardness as CaCO3 | 8.3–109 mg/L | No standard printed | 1/25, in the 2025 report | Water Authority of Western Nassau County 2025 annual report (opens in a new tab) |
Roslyn and Garden City print a low-to-high range rather than an average, so the result column is that range. SCWA prints an average and a range for each distribution area. Area 1 PFAS rows print Violation: No. A single high above the printed MCL is not itself a violation under the Table 3 rule cited in the PFOS row. Western Garden City is also served by the Water Authority of Western Nassau; the Garden City rows above are the village’s own report. More communities: Nassau, Suffolk, and contaminants compared.
1.Open the report for your address
Use your community page. Note PFAS, 1,4-dioxane, nitrate, the disinfectant residual, and hardness, each next to the limit and the date.
2.Name the job
A chosen pH at one faucet is what Enagic’s K8 is built to do. A named contaminant at every tap, or at the drinking-water tap, is a filter or reverse osmosis question. Hardness is neither: NSF/ANSI 44 is the softener standard. Water softeners.
3.Match a listing to the substance
Search NSF’s listings (opens in a new tab), and check IAPMO and WQA (opens in a new tab), for the model number and the contaminant. EPA lists those bodies, plus CSA and UL, on its PFAS filter page.
4.Choose the equipment Fieldstone sells
Fieldstone does not sell ionizers. We sell whole-house carbon filtration and under-sink reverse osmosis. We will show you the listing for the model on a quote. A reduction claim applies only when a certifier’s directory lists that exact model.
Questions
Common questions
Sources
Last reviewed .
- Enagic, LeveLuk K8 product page (opens in a new tab)
- Enagic, LeveLuk K8 owner's manual (PDF) (opens in a new tab)
- NSF drinking water treatment unit listings (opens in a new tab)
- NSF listings search, company name Enagic, no products found (listings current November 12, 2026) (opens in a new tab)
- NSF listings search, company name Kangen, no products found (listings current November 12, 2026) (opens in a new tab)
- NSF, standards for water treatment systems (opens in a new tab)
- NSF, Forever chemicals and the advancement of filtration standards, September 27, 2024 (opens in a new tab)
- U.S. EPA, identifying drinking water filters certified to reduce PFAS (opens in a new tab)
- Mayo Clinic Staff, Alkaline water: Better than plain water?, February 20, 2025 (opens in a new tab)
- Fenton TR, Huang T. Systematic review of the association between dietary acid load, alkaline water and cancer. BMJ Open. 2016;6:e010438. Open full text via PubMed Central. (opens in a new tab)
- New York State Department of Health, drinking water standards for PFAS and 1,4-dioxane (opens in a new tab)
- U.S. EPA, PFAS National Primary Drinking Water Regulation (MCLs of 4.0 ppt for PFOA and PFOS; 10 ppt for PFHxS, PFNA, and HFPO-DA; Hazard Index) (opens in a new tab)
- U.S. EPA, PFAS rule implementation, including May 18, 2026 proposed rules (opens in a new tab)
- U.S. EPA, proposed rescission of the PFHxS, PFNA, HFPO-DA, and Hazard Index provisions (announced May 18, 2026; not final) (opens in a new tab)
- Federal Register, April 26, 2024 PFAS NPDWR: compliance with the MCLs by April 26, 2029 (opens in a new tab)
- Federal Register, May 20, 2026 proposed rule to extend PFOA and PFOS compliance from April 26, 2029 to April 26, 2031 for systems that request it (not final) (opens in a new tab)
- Federal Register, May 20, 2026 proposed rescission of PFHxS, PFNA, HFPO-DA, and Hazard Index provisions (not final) (opens in a new tab)
- NYS Department of Health, unofficial compilation of 10 NYCRR Subpart 5-1 tables, Table 3 confirmatory-sample rule for PFOA and PFOS (opens in a new tab)
- Suffolk County Water Authority, water quality reports landing page (2026 annual report) (opens in a new tab)
- Suffolk County Water Authority, 2026 Drinking Water Quality Report, full PDF (opens in a new tab)
- Roslyn Water District, 2025 Annual Water Quality Report (opens in a new tab)
- Village of Garden City, 2025 Drinking Water Quality Report (opens in a new tab)
- Suffolk County Water Authority, 2026 Drinking Water Quality Report (2025 data), results pages (opens in a new tab)
- Water Authority of Western Nassau County, 2025 Annual Water Quality Report (opens in a new tab)
Start here
Read the report, then test the tap.
Your community page shows what the supplier published. A free in-home test measures the tap. We will show you the certifier listing for a whole-house filter or under-sink RO, and say so when a claim is the manufacturer's rather than a listing.