Nassau County · Public water (Bethpage Water District)
Water Quality in Plainedge, NY — What’s In Your Water
Plainedge's water is supplied by Bethpage Water District. The most recent published results show Copper at 0.035 mg/L, Chloride at 20.9 mg/L. Every figure below is shown against its NY or EPA limit and cited to its source.
Reported contaminants
Plainedge water, by the numbers
ND means not detected. Units: µg/L is micrograms per liter (parts per billion); ng/L is nanograms per liter (parts per trillion); mg/L is milligrams per liter (parts per million). Status uses the words below, near, exceeds, or trace — not color alone.
Source: Bethpage Water District 2025 Annual Water Quality Report (opens in a new tab)
| Substance | Detected level | Limit | Status |
|---|---|---|---|
| PFAS | |||
| PFBA (about this substance) | 2.55 ng/LRange ND–2.55 | No regulatory limit | — |
| PFPeA (about this substance) | 2.95 ng/LRange ND–2.95 | No regulatory limit | — |
| Nitrate, metals & inorganics | |||
| Nitrate (about this substance) | 6.6 mg/LRange ND–6.6 | 10EPA MCL | Below limit |
| Nitrate-Nitrite (as N) (about this substance) | 6.6 mg/LRange ND–6.6 | 10EPA MCL | Below limit |
| 1,1-Dichloroethane (about this substance) | 3.1 µg/LRange ND–3.1 | 5EPA MCL | Below limit |
| Perchlorate (about this substance) | 8.8 µg/LRange ND–8.8 | 18EPA action level | Below limit |
| Combined Radium 226/228 (about this substance) | 2.295 pCi/LRange 0.548–2.295 | 5EPA MCL | Below limit |
| Chloride (about this substance) | 20.9 mg/LRange 8.7–20.9 | 250NYS secondary standard | Below limit |
| Gross alpha (about this substance) | 0.899 pCi/LRange ND–0.899 | 15EPA MCL | Below limit |
| Gross beta (about this substance) | 2.6 pCi/LRange 0.524–2.6 | 50EPA MCL | Below limit |
| Nickel (about this substance) | 0.004 mg/LRange 0.001–0.004 | 0.1EPA MCL | Below limit |
| Copper (about this substance) | 0.009 mg/LRange ND–0.009 | 1.3EPA action level | Below limit |
| Barium (about this substance) | 0.005 mg/LRange ND–0.005 | 2EPA MCL | Below limit |
| Uranium (about this substance) | 0.037 µg/LRange ND–0.037 | 30EPA MCL | Below limit |
| Calcium (about this substance) | 7.8 mg/LRange 2.4–7.8 | No regulatory limit | — |
| Magnesium (about this substance) | 2.9 mg/LRange 0.95–2.9 | No regulatory limit | — |
| Sodium (about this substance) | 13.6 mg/LRange 7.1–13.6 | No regulatory limit | — |
| Zinc (about this substance) | 0.025 mg/LRange ND–0.025 | No regulatory limit | — |
| Field Temperature (about this substance) | 15.9 deg CRange 12.9–15.9 | No regulatory limit | — |
| Alkalinity (about this substance) | 3.7 mg/LRange ND–3.7 | No regulatory limit | — |
| Corrosivity (LSI) (about this substance) | -1.07 n/aRange -5.61–-1.07 | No regulatory limit | — |
| Total Dissolved Solids (about this substance) | 87.0 mg/LRange 25.0–87.0 | No regulatory limit | — |
| Lead & copper | |||
| Lead (about this substance) | ND µg/L(90th percentile)Range ND–1.1 | 15EPA action level | Trace — detected in some samples |
| Copper (about this substance) | 0.035 mg/L(90th percentile)Range 0.004–0.048 | 1.3EPA action level | Below limit |
| Disinfection byproducts | |||
| Chloroform (about this substance) | 2.0 µg/LRange ND–2.0 | 50EPA MCL | Below limit |
| Total Trihalomethanes (about this substance) | 2.0 µg/LRange ND–2.0 | 80EPA MCL | Below limit |
| Chlorate (about this substance) | 12.7 µg/LRange ND–12.7 | No regulatory limit | — |
Water characteristics
| Substance | Detected level | Limit | Status |
|---|---|---|---|
| Free Chlorine (about this substance) | 0.91 mg/LRange 0.59–0.91 | 4.0EPA MRDL | Below limit |
| pH (about this substance) | 8.3 UnitsRange 8.0–8.3 | No regulatory limit | — |
| Hardness (total) (about this substance) | 31.5 mg/LRange 9.9–31.5 | No regulatory limit | — |
| Calcium hardness (about this substance) | 19.6 mg/LRange 6.0–19.6 | No regulatory limit | — |
Status reflects the average of all samples. Individual readings may be higher; see range.
Where the report prints both an average and a range, the status column here is judged on the average; where it prints a maximum or a 90th-percentile result, that figure is used. Bethpage Water District's report does not name Plainedge in its service area. The service-area boundary the NYS Department of Health supplies to EPA places most of Plainedge inside the district (https://www.epa.gov/ground-water-and-drinking-water/community-water-system-service-area-boundaries (opens in a new tab)). That mapping is not in the report. The report carries 1 notice: No violations reported: 'the District's supply water is in full compliance with all Federal, State and County regulations and that no violations exist' (page 1). All table rows with a printed Violation cell show 'No'. 100% of Plainedge's land lies inside a public water service area (Bethpage Water District and others), per the NYS Department of Health boundaries EPA publishes. A service area is where mains run; a home inside it can still be on a private well.
Your water district
Who supplies Plainedge’s water
Check your water bill to confirm your district. More than one utility serves this town — the name on your bill is the one that matches your service.
Bethpage Water District
Serves this community per the NYS DOH service-area boundary EPA publishes.
South Farmingdale Water District
Also serves about 36% of this community per the NYS DOH service-area boundary.
EPA compliance
Federal violation record for Plainedge’s suppliers
The annual report above lists what was found in the water. EPA’s compliance database records whether each supplier met its testing, treatment, and reporting obligations.
- Liberty Utilities New York - Merrick
EPA ID NY2902840 · serves about 135,000 people
- Violations 2022–2026
- 27
- Health-based
- 3
- Last violation
- 2024
- South Farmingdale Water District
EPA ID NY2902854 · serves about 44,700 people
- Violations 2022–2026
- 0
- Health-based
- 0
- Last violation
- none on file
- Massapequa Water District
EPA ID NY2902837 · serves about 43,000 people
- Violations 2022–2026
- 0
- Health-based
- 0
- Last violation
- 2018
Compliance counts are EPA Safe Drinking Water Information System records pulled directly from EPA. Most violations are monitoring or reporting lapses, not unsafe water; health-based violations (a contaminant limit, disinfectant level, or treatment technique) are counted separately. A system listed for a ZIP code may serve only part of it.
What the numbers mean
Like most of Nassau, Plainedge runs on treated public water. The day-to-day concerns here are the chlorine and chloramine used to keep the supply safe through the distribution system, plus the naturally high hardness of Long Island groundwater — the mineral content that leaves scale on fixtures and spots on glassware. Neither is an emergency, but both are exactly what point-of-entry carbon filtration and softening are designed to address.
What this means for filtration
Matching Plainedge’s water to a system
For Plainedge, the numbers point first to under-sink reverse osmosis and whole-house carbon filtration: dissolved contaminants close to their limits.
- Recommended
Under-Sink Reverse Osmosis
Dissolved contaminants close to their limits
Nitrate averaged 6.6 mg/L with samples up to 6.6 against a 10 mg/L limit — the closest number to its limit here. It passes straight through carbon; reverse osmosis is designed to reduce it at the tap. Perchlorate was detected up to 8.8 µg/L (limit 18).
Explore Under-Sink Reverse Osmosis - Recommended
Whole-House Carbon Filtration
Chlorine residual 0.91 mg/L
Free chlorine averaged 0.91 mg/L at the entry point (limit 4), the residual that gives tap water its pool taste and dries skin and hair. Chlorination by-products (trihalomethanes) reached 2 µg/L in some samples against an 80 µg/L limit for the group; they are absorbed in the shower as well as drunk.
Explore Whole-House Carbon Filtration - Not needed here
Whole-House + Softener Combo
Hardness 31.5 mg/L, about 1.8 grains per gallon
At 31.5 mg/L (1.8 gpg) the water is soft. A softener is not needed.
Explore Whole-House + Softener Combo
Questions
Plainedge water FAQ
Nearby Nassau County towns
Free in-home test
See what’s really in your Plainedge water.
Published reports cover the public supply — a free in-home test measures your taps (and your well, if you have one), then we walk you through the results.