Nassau County · Public water (Albertson Water District)
Water Quality in Searingtown, NY — What’s In Your Water
Searingtown's water is supplied by Albertson Water District. The most recent published results show Total Coliform at 0.42% samples positive n/a, Barium at 0.019 mg/L. Every figure below is shown against its NY or EPA limit and cited to its source.
Reported contaminants
Searingtown water, by the numbers
ND means not detected. Units: µg/L is micrograms per liter (parts per billion); ng/L is nanograms per liter (parts per trillion); mg/L is milligrams per liter (parts per million). Status uses the words below, near, exceeds, or trace — not color alone.
Water characteristics
| Substance | Detected level | Limit | Status | Source |
|---|---|---|---|---|
| Free Chlorine (about this substance) | 0.872 mg/LRange 0.5–1.4 | 4EPA MRDL | Below limit | Albertson Water District 2025 Annual Water Quality Report (opens in a new tab) |
| Calcium hardness (about this substance) | 41.9 mg/LRange 20.4–41.9 | No regulatory limit | — | Albertson Water District 2025 Annual Water Quality Report (opens in a new tab) |
| pH (about this substance) | 7.6 UnitsRange 6.8–7.6 | No regulatory limit | — | Albertson Water District 2025 Annual Water Quality Report (opens in a new tab) |
| Hardness (total) (about this substance) | 74.4 mg/LRange 37.1–74.4 | No regulatory limit | — | Albertson Water District 2025 Annual Water Quality Report (opens in a new tab) |
Where the report prints only a range, status reflects the high end of that range; where it prints an average, status reflects the average.
Where the report prints both an average and a range, the status column here is judged on the average; where it prints a maximum or a 90th-percentile result, that figure is used. Albertson Water District's report does not name Searingtown in its service area. The service-area boundary the NYS Department of Health supplies to EPA places most of Searingtown inside the district (https://www.epa.gov/ground-water-and-drinking-water/community-water-system-service-area-boundaries (opens in a new tab)). That mapping is not in the report. The report carries 2 notices: MONITORING VIOLATION NOTICE - 'Monitoring Requirements Not Met for the Albertson Water District'. During the 2nd, 3rd & 4th quarters in 2024 and the 1st quarter of 2025, the District did not monitor or test for dieldrin (EPA Analytical Method 505) at Well 1 and Well 5 (required 1 sample quarterly; 0 samples taken for the 1st quarter of 2025; samples taken 4/17/2025). 'Even though this was not an emergency ... There is nothing you need to do at this time.' Dieldrin samples were obtained and tested during the 2nd, 3rd, and 4th quarters of 2025, yielding results below the MCL; a system of checks and balances has been instituted. Notice date distributed: April 2025. Page 1 also states: 'We failed to adequately sample our wells for dieldrin in the first quarter of 2025 and we were issued a drinking water violation.' Total coliform: In July 2025, total coliforms were detected in 2 of 471 routine compliance samples (0.42% samples positive); repeat samples were negative; <5% so no Level 1 assessment triggered; E. coli not detected. Not a violation (Violation column 'No'). 100% of Searingtown's land lies inside a public water service area (Albertson Water District and others), per the NYS Department of Health boundaries EPA publishes. A service area is where mains run; a home inside it can still be on a private well.
Your water district
Who supplies Searingtown’s water
Check your water bill to confirm your district. More than one utility serves this town — the name on your bill is the one that matches your service.
Albertson Water District
Serves this community per the NYS DOH service-area boundary EPA publishes.
Garden City Park Water District
Also serves about 33% of this community per the NYS DOH service-area boundary.
EPA compliance
Federal violation record for Searingtown’s suppliers
The annual report above lists what was found in the water. EPA’s compliance database records whether each supplier met its testing, treatment, and reporting obligations.
- Garden City Park Water District
EPA ID NY2902825 · serves about 18,000 people
- Violations 2022–2026
- 0
- Health-based
- 0
- Last violation
- none on file
- Albertson Water District
EPA ID NY2902815 · serves about 13,500 people
- Violations 2022–2026
- 304
- Health-based
- 0
- Last violation
- 2025
Compliance counts are EPA Safe Drinking Water Information System records pulled directly from EPA. Most violations are monitoring or reporting lapses, not unsafe water; health-based violations (a contaminant limit, disinfectant level, or treatment technique) are counted separately. A system listed for a ZIP code may serve only part of it.
What the numbers mean
Like most of Nassau, Searingtown runs on treated public water. The day-to-day concerns here are the chlorine and chloramine used to keep the supply safe through the distribution system, plus the naturally high hardness of Long Island groundwater — the mineral content that leaves scale on fixtures and spots on glassware. Neither is an emergency, but both are exactly what point-of-entry carbon filtration and softening are designed to address.
What this means for filtration
Matching Searingtown’s water to a system
For Searingtown, the numbers point first to under-sink reverse osmosis and whole-house carbon filtration: dissolved contaminants close to their limits.
- Recommended
Under-Sink Reverse Osmosis
Dissolved contaminants close to their limits
Nitrate averaged 3 mg/L (limit 10), moderate but present; reverse osmosis reduces it at the tap. PFOA/PFOS reached 8.01 ng/L (ppt) in at least one sample — under New York's 10 ppt limit but at or above the 4.0 ppt federal MCL, with federal compliance due April 26, 2029. Whether an under-sink reverse osmosis model reduces PFOA or PFOS depends on that model's certification or performance data sheet. Sodium averaged 35.5 mg/L, above the 20 mg/L level New York flags for sodium-restricted diets. Perchlorate was detected up to 1.2 µg/L (limit 18).
Explore Under-Sink Reverse Osmosis - Recommended
Whole-House Carbon Filtration
Solvent traces and chlorine in the supply
Free chlorine averaged 0.872 mg/L at the entry point (limit 4), the residual that gives tap water its pool taste and dries skin and hair. Solvent traces were detected: Tetrachloroethene (PCE) up to 3.2 µg/L (limit 5 each). Whether a whole-house carbon model reduces those solvents is on that model's data sheet.
Explore Whole-House Carbon Filtration - Worth considering
Whole-House + Softener Combo
Hardness 74.4 mg/L, about 4.4 grains per gallon
At 74.4 mg/L (4.4 gpg) the water is moderately hard. A softener is a comfort choice here, not a necessity.
Explore Whole-House + Softener Combo
Questions
Searingtown water FAQ
Nearby Nassau County towns
Free in-home test
See what’s really in your Searingtown water.
Published reports cover the public supply — a free in-home test measures your taps (and your well, if you have one), then we walk you through the results.