Skip to content
Fieldstone Water Co.

Suffolk County · Public water (SCWA — Distribution Area 34)

Water Quality in Sag Harbor, NY — What’s In Your Water

Sag Harbor's water is supplied by the Suffolk County Water Authority (SCWA) — Distribution Area 34. The most recent published results show Sucralose at 0.08 µg/L, Bromodichloromethane at 0.27 µg/L. Every figure below is shown against its NY or EPA limit and cited to its source.

Reported contaminants

Sag Harbor water, by the numbers

Data: SCWA 2026 Drinking Water Quality Report (2025 data) · Verified 2026-09-14

These are the results for the whole SCWA distribution area. See every community in Area 34

ND means not detected. Units: µg/L is micrograms per liter (parts per billion); ng/L is nanograms per liter (parts per trillion); mg/L is milligrams per liter (parts per million). Status uses the words below, near, exceeds, or trace — not color alone.

Source: Suffolk County Water Authority 2026 Drinking Water Quality Report (2025 data) (opens in a new tab)

Contaminants reported in Sag Harbor, Suffolk County drinking water, with detected level, regulatory limit, and status.
SubstanceDetected levelLimitStatus
PFAS
Tested for and not detected (11): PFOS (about this substance), PFOA (about this substance), 6:2 FTS (about this substance), PFBS (about this substance), PFBA (about this substance), PFHpA (about this substance), PFHxS (about this substance), PFHxA (about this substance), PFNA (about this substance), PFPeS (about this substance), PFPeA (about this substance)
Industrial solvents & 1,4-dioxane
Tested for and not detected (6): 1,4-Dioxane (about this substance), cis-1,2-Dichloroethene (about this substance), 1,1-Dichloroethene (about this substance), Tetrachloroethene (PCE) (about this substance), 1,1,1-Trichloroethane (about this substance), Trichloroethene (TCE) (about this substance)
Nitrate, metals & inorganics
Iron (about this substance)ND µg/LRange ND–35300NYS secondary standardTrace — detected in some samples
Turbidity (about this substance)0.42 NTURange ND–0.825EPA MCLBelow limit
Nitrate (about this substance)0.66 mg/LRange 0.57–0.8410EPA MCLBelow limit
Chloride (about this substance)15.6 mg/LRange 13.7–18.6250NYS secondary standardBelow limit
Sulfate (about this substance)10.0 mg/LRange 7.4–18.4250NYS secondary standardBelow limit
Copper (about this substance)0.02 mg/LRange ND–0.041.3EPA action levelBelow limit
Chromium (total) (about this substance)ND µg/LRange ND–0.6100EPA MCLTrace — detected in some samples
Hexavalent Chromium (about this substance)0.36 µg/LRange ND–0.57100EPA MCLBelow limit
Sucralose (about this substance)0.08 µg/LRange ND–0.1350NYS MCL (unspecified organic contaminant)Below limit
Acesulfame-K (about this substance)ND µg/LRange ND–0.0750NYS MCL (unspecified organic contaminant)Trace — detected in some samples
Alkalinity (about this substance)39.1 mg/LRange 29.2–48.6No regulatory limit—
Aluminum (about this substance)ND mg/LRange ND–0.03No regulatory limitTrace — detected in some samples
Calcium (about this substance)12.9 mg/LRange 8.9–16.0No regulatory limit—
CO2, calculated (about this substance)6.2 mg/LRange 2.4–18.0No regulatory limit—
Hardness (total) (about this substance)46.1 mg/LRange 35.9–60.0No regulatory limit—
Lithium (about this substance)ND µg/LRange ND–1.2No regulatory limitTrace — detected in some samples
Magnesium (about this substance)3.38 mg/LRange 2.36–4.90No regulatory limit—
Nickel (about this substance)ND µg/LRange ND–1.0No regulatory limitTrace — detected in some samples
pH (about this substance)7.2 pH UnitsRange 6.5–7.5No regulatory limit—
pH, field (about this substance)7.4 pH UnitsRange 7.0–8.0No regulatory limit—
Phosphate, total (about this substance)ND mg/LRange ND–0.25No regulatory limitTrace — detected in some samples
Potassium (about this substance)0.76 mg/LRange 0.66–0.86No regulatory limit—
Silicon (about this substance)6.6 mg/LRange 5.8–7.8No regulatory limit—
Sodium (about this substance)9.7 mg/LRange 8.7–11.8No regulatory limit—
Specific conductance (about this substance)149 umho/cmRange 126–171No regulatory limit—
Strontium (about this substance)0.044 mg/LRange 0.039–0.059No regulatory limit—
Total Organic Carbon (TOC) (about this substance)ND mg/LRange ND–0.6No regulatory limitTrace — detected in some samples
Vanadium (about this substance)ND µg/LRange ND–2.8No regulatory limitTrace — detected in some samples
Radon-222 (about this substance)174 pCi/LRange ND–298No regulatory limit—
Tested for and not detected (52): Carbamazepine (about this substance), Dilantin (about this substance), 5-(4-Hydroxyphenyl)-5-Phenylhydantoin (about this substance), Ibuprofen (about this substance), Imidacloprid (about this substance), Lamotrigine (about this substance), Meprobamate (about this substance), Phenobarbital (about this substance), Primidone (about this substance), Saccharin (about this substance), Stevioside (about this substance), Ammonia (as N) (about this substance), Arsenic (about this substance), Barium (about this substance), Boron (about this substance), Bromide (about this substance), Cobalt (about this substance), Color (about this substance), Fluoride (about this substance), Manganese (about this substance), Molybdenum (about this substance), Nitrite (about this substance), Perchlorate (about this substance), Titanium (about this substance), Uranium (about this substance), Zinc (about this substance), Alachlor ESA (about this substance), Alachlor OA (about this substance), Chlordane (about this substance), Diethyltoluamide (DEET) (about this substance), Metalaxyl (about this substance), Metolachlor (about this substance), Metolachlor OA (about this substance), Tetrachloroterephthalic Acid (about this substance), Chlorobenzene (about this substance), Chlorodifluoromethane (about this substance), Chloromethane (about this substance), Dichlorodifluoromethane (about this substance), 1,1-Dichlorethane (about this substance), 1,2-Dichloropropane (about this substance), Ethyl Benzene (about this substance), Methylene Chloride (about this substance), MTBE (about this substance), o-Xylene (about this substance), p,m-Xylene (about this substance), Tetrahydrofuran (about this substance), 1,2,4-Trichlorobenzene (about this substance), Trichlorofluoromethane (about this substance), 1,2,3-Trichloropropane (about this substance), 1,1,2-Trichlorotrifluoroethane (about this substance), Gross alpha (about this substance), Gross beta (about this substance)
Lead & copper
Copper (tap samples) (about this substance)0.377 mg/L(90th percentile)Range 0.022–0.6201.3EPA action levelBelow limit
Lead (about this substance)1.25 µg/L(90th percentile)Range ND–6.4715EPA action levelBelow limit
Disinfection byproducts
Free Chlorine (about this substance)0.98 mg/LRange 0.32–1.404EPA MRDLBelow limit
Chloroform (about this substance)1.68 µg/LRange ND–2.8480EPA MCLBelow limit
Bromoform (about this substance)ND µg/LRange ND–0.4180EPA MCLTrace — detected in some samples
Bromodichloromethane (about this substance)0.27 µg/LRange ND–1.2480EPA MCLBelow limit
Dibromochloromethane (about this substance)0.26 µg/LRange ND–1.2080EPA MCLBelow limit
Chlorate (about this substance)0.09 mg/LRange 0.07–0.13No regulatory limit—
Tested for and not detected (6): Bromochloroacetic Acid (about this substance), Bromodichloroacetic Acid (about this substance), Dibromoacetic Acid (about this substance), Dichloroacetic Acid (about this substance), Monochloroacetic Acid (about this substance), Trichloroacetic Acid (about this substance)

Water characteristics

Water characteristics reported in Sag Harbor, Suffolk County drinking water.
SubstanceDetected levelLimitStatus
Sodium Cyclamate (about this substance)ND µg/L50NYS MCL (unspecified organic contaminant)Not detected

Status reflects the average of all samples. Individual readings may be higher; see range.

Values are ranges/averages across all wells feeding each distribution area at the entry point. A home near an area boundary may receive water from the adjacent area. Some homes here draw from private wells. These results do not apply to well water. Area assignment is read from SCWA's distribution-area map. Confirm your address with SCWA's See My Water Quality lookup (https://www.scwa.com/mywaterquality/ (opens in a new tab)). 95% of Sag Harbor's land lies inside a public water service area (Suffolk County Water Authority), per the NYS Department of Health boundaries EPA publishes. A service area is where mains run; a home inside it can still be on a private well.

Your water district

Who supplies Sag Harbor’s water

EPA compliance

Federal violation record for Sag Harbor’s suppliers

The annual report above lists what was found in the water. EPA’s compliance database records whether each supplier met its testing, treatment, and reporting obligations.

Compliance counts are EPA Safe Drinking Water Information System records pulled directly from EPA. Most violations are monitoring or reporting lapses, not unsafe water; health-based violations (a contaminant limit, disinfectant level, or treatment technique) are counted separately. A system listed for a ZIP code may serve only part of it.

What the numbers mean

Sag Harbor is served largely by SCWA, with private wells mixed in toward its edges. Western and central Suffolk carry Long Island's signature groundwater story — trace 1,4-dioxane and PFAS from historic land use, plus nitrate loading from lawns and septic systems. SCWA treats for these at its wellfields, but a point-of-entry system gives you a second barrier and covers any private-well portion of the neighborhood.

What this means for filtration

Matching Sag Harbor’s water to a system

For Sag Harbor, the numbers point first to whole-house carbon filtration: chlorine residual 0.98 mg/L.

  • Recommended

    Whole-House Carbon Filtration

    Chlorine residual 0.98 mg/L

    Free chlorine averaged 0.98 mg/L at the entry point (limit 4), the residual that gives tap water its pool taste and dries skin and hair. Chlorination by-products (trihalomethanes) reached 2.84 µg/L in some samples against an 80 µg/L limit for the group; they are absorbed in the shower as well as drunk.

    Explore Whole-House Carbon Filtration
  • Worth considering

    Under-Sink Reverse Osmosis

    Drinking-water polish

    The supplier's 90th-percentile lead result was 0.00125 mg/L (1 ppb) against the 15 ppb action level. Lead enters water from a home's own service line and fixtures, so the system figure says little about any one house; a filter certified for lead (NSF/ANSI 53) or reverse osmosis at the kitchen tap reduces it at the point you drink.

    Explore Under-Sink Reverse Osmosis
  • Not needed here

    Whole-House + Softener Combo

    Hardness 46.1 mg/L, about 2.7 grains per gallon

    At 46.1 mg/L (2.7 gpg) the water is soft. A softener is not needed.

    Explore Whole-House + Softener Combo

Questions

Sag Harbor water FAQ

Free in-home test

See what’s really in your Sag Harbor water.

Published reports cover the public supply — a free in-home test measures your taps (and your well, if you have one), then we walk you through the results.