Suffolk County · Public water (Private wells + SCWA — East Setauket / Setauk…)
Water Quality in East Setauket, NY — What’s In Your Water
East Setauket draws its water from the same Suffolk County Water Authority system as the rest of the Three Village area — Distribution Area 15 — with the Area 14 boundary near Port Jefferson Station just to the east. SCWA's 2025 results for this area found nitrate averaging 4.7 mg/L and ranging as high as 8.6 against a limit of 10, 1,4-dioxane detected up to 0.77 µg/L against New York's 1.0 limit, and iron as high as 664 µg/L at some wells against a 300 standard. No contaminant exceeded its limit on average. Every figure below is shown against its New York or EPA limit and cited to the source report.
Reported contaminants
East Setauket water, by the numbers
ND means not detected. Units: µg/L is micrograms per liter (parts per billion); ng/L is nanograms per liter (parts per trillion); mg/L is milligrams per liter (parts per million). Status uses the words below, near, exceeds, or trace — not color alone.
Source: Suffolk County Water Authority 2026 Drinking Water Quality Report (2025 data) (opens in a new tab)
| Substance | Detected level | Limit | Status |
|---|---|---|---|
| PFAS | |||
| PFOA (about this substance) | ND ng/LRange ND–6 | 10NYS MCL | Trace — detected in some samples |
| PFOS (about this substance) | ND ng/LRange ND–5 | 10NYS MCL | Trace — detected in some samples |
| PFHxS (about this substance) | ND ng/LRange ND–9 | 50000NYS MCL (unspecified organic contaminant) | Trace — detected in some samples |
| PFHxA (about this substance) | ND ng/LRange ND–8 | 50000NYS MCL (unspecified organic contaminant) | Trace — detected in some samples |
| PFNA (about this substance) | ND ng/LRange ND–7 | 50000NYS MCL (unspecified organic contaminant) | Trace — detected in some samples |
| PFBA (about this substance) | ND ng/LRange ND–6 | 50000NYS MCL (unspecified organic contaminant) | Trace — detected in some samples |
| PFBS (about this substance) | ND ng/LRange ND–4 | 50000NYS MCL (unspecified organic contaminant) | Trace — detected in some samples |
| PFHpA (about this substance) | ND ng/LRange ND–2 | 50000NYS MCL (unspecified organic contaminant) | Trace — detected in some samples |
| PFPeA (about this substance) | 2 ng/LRange ND–11 | 50000NYS MCL (unspecified organic contaminant) | Below limit |
| 6:2 FTS (about this substance) | ND ng/L | 50000NYS MCL (unspecified organic contaminant) | Not detected |
| PFPeS (about this substance) | ND ng/L | 50000NYS MCL (unspecified organic contaminant) | Not detected |
| Industrial solvents & 1,4-dioxane | |||
| 1,1-Dichloroethene (about this substance) | ND µg/LRange ND–1.47 | 5NYS MCL (principal organic contaminant) | Trace — detected in some samples |
| 1,1,1-Trichloroethane (about this substance) | ND µg/LRange ND–1.20 | 5NYS MCL (principal organic contaminant) | Trace — detected in some samples |
| 1,4-Dioxane (about this substance) | 0.21 µg/LRange ND–0.77 | 1NYS MCL | Below limit |
| Tetrachloroethene (PCE) (about this substance) | ND µg/LRange ND–0.99 | 5NYS MCL (principal organic contaminant) | Trace — detected in some samples |
| cis-1,2-Dichloroethene (about this substance) | ND µg/LRange ND–0.82 | 5NYS MCL (principal organic contaminant) | Trace — detected in some samples |
| Trichloroethene (TCE) (about this substance) | ND µg/LRange ND–0.47 | 5NYS MCL (principal organic contaminant) | Trace — detected in some samples |
| Nitrate, metals & inorganics | |||
| Color (about this substance) | ND Color UnitsRange ND–10 | 15NYS secondary standard | Trace — detected in some samples |
| Nitrate (about this substance) | 4.70 mg/LRange 0.08–8.60 | 10EPA MCL | Below limit |
| 1,1,2-Trichlorotrifluoroethane (about this substance) | ND µg/LRange ND–1.54 | 5NYS MCL (principal organic contaminant) | Trace — detected in some samples |
| Iron (about this substance) | 80 µg/LRange ND–664 | 300NYS secondary standard | Exceeds limit |
| 1,1-Dichlorethane (about this substance) | ND µg/LRange ND–0.95 | 5NYS MCL (principal organic contaminant) | Trace — detected in some samples |
| Chloride (about this substance) | 38.9 mg/LRange 4.4–127.2 | 250NYS secondary standard | Below limit |
| Arsenic (about this substance) | ND µg/LRange ND–1.4 | 10EPA MCL | Trace — detected in some samples |
| Chlordane (about this substance) | ND µg/LRange ND–0.22 | 2EPA MCL | Trace — detected in some samples |
| MTBE (about this substance) | ND µg/LRange ND–1.04 | 10EPA MCL | Trace — detected in some samples |
| Gross alpha (about this substance) | ND pCi/LRange ND–1.52 | 15EPA MCL | Trace — detected in some samples |
| Turbidity (about this substance) | 0.45 NTURange ND–1.99 | 5EPA MCL | Below limit |
| Gross beta (about this substance) | ND pCi/LRange ND–3.88 | 50EPA MCL | Trace — detected in some samples |
| 1,2,3-Trichloropropane (about this substance) | ND µg/LRange ND–0.36 | 5NYS MCL (principal organic contaminant) | Trace — detected in some samples |
| Chlorobenzene (about this substance) | ND µg/LRange ND–0.30 | 5NYS MCL (principal organic contaminant) | Trace — detected in some samples |
| 1,2-Dichloropropane (about this substance) | ND µg/LRange ND–0.29 | 5NYS MCL (principal organic contaminant) | Trace — detected in some samples |
| Perchlorate (about this substance) | 0.98 µg/LRange ND–4.54 | 18NYS MCL | Below limit |
| Copper (about this substance) | ND mg/LRange ND–0.07 | 1.3EPA action level | Trace — detected in some samples |
| Sulfate (about this substance) | 11.4 mg/LRange ND–37.3 | 250NYS secondary standard | Below limit |
| Manganese (about this substance) | 12 µg/LRange ND–66 | 300NYS secondary standard | Below limit |
| Uranium (about this substance) | ND µg/LRange ND–1.07 | 30EPA MCL | Trace — detected in some samples |
| Tetrachloroterephthalic Acid (about this substance) | ND µg/LRange ND–1.42 | 50NYS MCL (unspecified organic contaminant) | Trace — detected in some samples |
| Zinc (about this substance) | ND mg/LRange ND–0.12 | 5NYS secondary standard | Trace — detected in some samples |
| Barium (about this substance) | 0.02 mg/LRange ND–0.10 | 2EPA MCL | Below limit |
| Chromium (total) (about this substance) | 0.8 µg/LRange ND–3.3 | 100EPA MCL | Below limit |
| Hexavalent Chromium (about this substance) | 0.69 µg/LRange ND–3.93 | 100EPA MCL | Below limit |
| Sucralose (about this substance) | 0.22 µg/LRange ND–2.58 | 50NYS MCL (unspecified organic contaminant) | Below limit |
| Diethyltoluamide (DEET) (about this substance) | ND µg/LRange ND–0.21 | 50NYS MCL (unspecified organic contaminant) | Trace — detected in some samples |
| Carbamazepine (about this substance) | ND µg/LRange ND–0.15 | 50NYS MCL (unspecified organic contaminant) | Trace — detected in some samples |
| Acesulfame-K (about this substance) | 0.13 µg/LRange ND–1.65 | 50NYS MCL (unspecified organic contaminant) | Below limit |
| Saccharin (about this substance) | ND µg/LRange ND–0.07 | 50NYS MCL (unspecified organic contaminant) | Trace — detected in some samples |
| Alkalinity (about this substance) | 48.4 mg/LRange ND–118.6 | No regulatory limit | — |
| Aluminum (about this substance) | 0.03 mg/LRange ND–0.13 | No regulatory limit | — |
| Ammonia (as N) (about this substance) | ND mg/LRange ND–0.09 | No regulatory limit | Trace — detected in some samples |
| Bromide (about this substance) | ND µg/LRange ND–65.9 | No regulatory limit | Trace — detected in some samples |
| Calcium (about this substance) | 22.0 mg/LRange 1.5–56.7 | No regulatory limit | — |
| CO2, calculated (about this substance) | 8.1 mg/LRange 0.7–42.8 | No regulatory limit | — |
| Cobalt (about this substance) | ND µg/LRange ND–1.7 | No regulatory limit | Trace — detected in some samples |
| Hardness (total) (about this substance) | 75.7 mg/LRange 6.5–168.4 | No regulatory limit | — |
| Lithium (about this substance) | ND µg/LRange ND–3.5 | No regulatory limit | Trace — detected in some samples |
| Magnesium (about this substance) | 5.04 mg/LRange 0.67–12.13 | No regulatory limit | — |
| Nickel (about this substance) | 0.6 µg/LRange ND–5.1 | No regulatory limit | — |
| pH (about this substance) | 7.2 pH UnitsRange 6.4–8.3 | No regulatory limit | — |
| pH, field (about this substance) | 7.4 pH UnitsRange 6.8–8.4 | No regulatory limit | — |
| Phosphate, total (about this substance) | 0.44 mg/LRange ND–3.90 | No regulatory limit | — |
| Potassium (about this substance) | 1.28 mg/LRange 0.33–3.17 | No regulatory limit | — |
| Silicon (about this substance) | 7.2 mg/LRange 4.7–10.7 | No regulatory limit | — |
| Sodium (about this substance) | 22.5 mg/LRange 3.7–68.3 | No regulatory limit | — |
| Specific conductance (about this substance) | 238 umho/cmRange 48–587 | No regulatory limit | — |
| Strontium (about this substance) | 0.066 mg/LRange ND–0.176 | No regulatory limit | — |
| Titanium (about this substance) | ND µg/LRange ND–5.1 | No regulatory limit | Trace — detected in some samples |
| Total Organic Carbon (TOC) (about this substance) | ND mg/LRange ND–0.6 | No regulatory limit | Trace — detected in some samples |
| Vanadium (about this substance) | ND µg/LRange ND–6.3 | No regulatory limit | Trace — detected in some samples |
| Radon-222 (about this substance) | ND pCi/LRange ND–164 | No regulatory limit | Trace — detected in some samples |
| Tested for and not detected (30): Dilantin (about this substance), 5-(4-Hydroxyphenyl)-5-Phenylhydantoin (about this substance), Ibuprofen (about this substance), Imidacloprid (about this substance), Lamotrigine (about this substance), Meprobamate (about this substance), Phenobarbital (about this substance), Primidone (about this substance), Stevioside (about this substance), Boron (about this substance), Fluoride (about this substance), Molybdenum (about this substance), Nitrite (about this substance), Alachlor ESA (about this substance), Alachlor OA (about this substance), Metalaxyl (about this substance), Metolachlor (about this substance), Metolachlor OA (about this substance), Chlorodifluoromethane (about this substance), Chloromethane (about this substance), Dichlorodifluoromethane (about this substance), Ethyl Benzene (about this substance), Methylene Chloride (about this substance), o-Xylene (about this substance), p,m-Xylene (about this substance), Tetrahydrofuran (about this substance), 1,2,4-Trichlorobenzene (about this substance), Trichlorofluoromethane (about this substance), Radium-226 (about this substance), Radium-228 (about this substance) | |||
| Lead & copper | |||
| Copper (tap samples) (about this substance) | 0.377 mg/L(90th percentile)Range 0.022–0.620 | 1.3EPA action level | Below limit |
| Lead (about this substance) | 1.25 µg/L(90th percentile)Range ND–6.47 | 15EPA action level | Below limit |
| Disinfection byproducts | |||
| Free Chlorine (about this substance) | 1.03 mg/LRange 0.31–1.77 | 4EPA MRDL | Below limit |
| Bromodichloromethane (about this substance) | ND µg/LRange ND–1.65 | 80EPA MCL | Trace — detected in some samples |
| Dibromochloromethane (about this substance) | ND µg/LRange ND–1.49 | 80EPA MCL | Trace — detected in some samples |
| Bromoform (about this substance) | ND µg/LRange ND–0.77 | 80EPA MCL | Trace — detected in some samples |
| Trichloroacetic Acid (about this substance) | ND µg/LRange ND–0.49 | 60EPA MCL | Trace — detected in some samples |
| Chloroform (about this substance) | 0.38 µg/LRange ND–2.26 | 80EPA MCL | Below limit |
| Chlorate (about this substance) | 0.11 mg/LRange 0.02–0.40 | No regulatory limit | — |
| Tested for and not detected (5): Bromochloroacetic Acid (about this substance), Bromodichloroacetic Acid (about this substance), Dibromoacetic Acid (about this substance), Dichloroacetic Acid (about this substance), Monochloroacetic Acid (about this substance) | |||
Water characteristics
| Substance | Detected level | Limit | Status |
|---|---|---|---|
| Sodium Cyclamate (about this substance) | ND µg/L | 50NYS MCL (unspecified organic contaminant) | Not detected |
Status reflects the average of all samples. Individual readings may be higher; see range.
Values are ranges/averages across all wells feeding each distribution area at the entry point. A home near an area boundary may receive water from the adjacent area. 100% of East Setauket's land lies inside a public water service area (Suffolk County Water Authority), per the NYS Department of Health boundaries EPA publishes. A service area is where mains run; a home inside it can still be on a private well.
Your water district
Who supplies East Setauket’s water
Suffolk County Water Authority
EPA compliance
Federal violation record for East Setauket’s suppliers
The annual report above lists what was found in the water. EPA’s compliance database records whether each supplier met its testing, treatment, and reporting obligations.
- Suffolk County Water Authority
EPA ID NY5110526 · serves about 1,100,000 people
- Violations 2022–2026
- 3
- Health-based
- 0
- Last violation
- 2025
Compliance counts are EPA Safe Drinking Water Information System records pulled directly from EPA. Most violations are monitoring or reporting lapses, not unsafe water; health-based violations (a contaminant limit, disinfectant level, or treatment technique) are counted separately. A system listed for a ZIP code may serve only part of it.
What the numbers mean
Nitrate and 1,4-dioxane, under the limit but present
East Setauket's water is a Three Village story, not an East Setauket story. SCWA reports by distribution area, and Area 15 is large — it runs from Setauket Harbor east to Shoreham and south through Selden and Coram. The numbers below are averages across every well feeding that zone. A home in East Setauket sits near the western edge of it, close to the Area 14 boundary that serves Port Jefferson, and homes on that boundary can receive water from either side.
Nitrate averaged 4.7 mg/L, with samples up to 8.6. The federal limit is 10. Nitrate is a groundwater legacy of fertilizer and septic systems across the whole Three Village area, and the range matters more than the average: some wells are well under, some are close to the line. Carbon filtration does not remove nitrate. Reverse osmosis at the tap does.
1,4-dioxane: 0.21 µg/L average, 0.77 high, 1.0 limit. New York's standard is the tightest in the country, and SCWA treats for it with advanced oxidation at the wellhead. It is not a contaminant a carbon filter addresses. This site makes no claim that any home system removes 1,4-dioxane.
Iron reached 664 µg/L at some wells. That is more than twice the 300 µg/L aesthetic standard, though the area average was 80. It is the cause of orange staining and metallic taste, and the reason older Three Village homes often have water-stained fixtures.
PFAS and solvents were trace-level and under limits. PFOA and PFOS peaked at 6 and 5 parts per trillion — under New York's 10 ppt limit, though above the 4.0 ppt EPA standard, with federal compliance due April 26, 2029. PCE and 1,1,1-trichloroethane appeared in some samples at a fraction of their limits.
Hardness is moderate at 75.7 mg/L — about 4.4 grains per gallon. Noticeably softer than Nassau water; a softener here is a preference, not a requirement.
What this means for filtration
Matching East Setauket’s water to a system
For East Setauket, the numbers point first to under-sink reverse osmosis and whole-house carbon filtration: dissolved contaminants close to their limits.
- Recommended
Under-Sink Reverse Osmosis
Dissolved contaminants close to their limits
Nitrate averaged 4.7 mg/L with samples up to 8.6 against a 10 mg/L limit — the closest number to its limit here. It passes straight through carbon; reverse osmosis is designed to reduce it at the tap. PFOA/PFOS reached 6 ng/L (ppt) in at least one sample — under New York's 10 ppt limit but at or above the 4.0 ppt federal MCL, with federal compliance due April 26, 2029. Whether an under-sink reverse osmosis model reduces PFOA or PFOS depends on that model's certification or performance data sheet. Sodium averaged 22.5 mg/L, above the 20 mg/L level New York flags for sodium-restricted diets. Perchlorate was detected up to 4.54 µg/L (limit 18). The supplier's 90th-percentile lead result was 0.00125 mg/L (1 ppb) against the 15 ppb action level. Lead enters water from a home's own service line and fixtures, so the system figure says little about any one house; a filter certified for lead (NSF/ANSI 53) or reverse osmosis at the kitchen tap reduces it at the point you drink.
Explore Under-Sink Reverse Osmosis - Recommended
Whole-House Carbon Filtration
Solvent traces and chlorine in the supply
Free chlorine averaged 1.03 mg/L at the entry point (limit 4), the residual that gives tap water its pool taste and dries skin and hair. Chlorination by-products (trihalomethanes) reached 2.26 µg/L in some samples against an 80 µg/L limit for the group; they are absorbed in the shower as well as drunk. Solvent traces were detected: Trichloroethene (TCE) up to 0.47 µg/L, Tetrachloroethene (PCE) up to 0.99 µg/L, 1,1,1-Trichloroethane up to 1.2 µg/L, cis-1,2-Dichloroethene up to 0.82 µg/L (limit 5 each). Whether a whole-house carbon model reduces those solvents is on that model's data sheet.
Explore Whole-House Carbon Filtration - Worth considering
Whole-House + Softener Combo
Hardness 75.7 mg/L, about 4.4 grains per gallon
At 75.7 mg/L (4.4 gpg) the water is moderately hard. A softener is a comfort choice here, not a necessity; some homes near the top of the 168 mg/L range will notice scale.
Explore Whole-House + Softener Combo - Worth considering
Private Well Treatment
Iron up to 664 µg/L in some wells
Iron peaked at 664 µg/L (average 80) against the 300 µg/L standard: orange staining on fixtures and laundry in the homes that get it. On a public supply this calls for an iron filter, the same oxidizing equipment used in a well package, only if you see the staining.
Explore Private Well Treatment
Questions
East Setauket water FAQ
Nearby Suffolk County towns
Free in-home test
See what’s really in your East Setauket water.
Published reports cover the public supply — a free in-home test measures your taps (and your well, if you have one), then we walk you through the results.