Suffolk County · Public water, some private wells (SCWA — Distribution Area 30)
Water Quality in Mattituck, NY — What’s In Your Water
Mattituck's water is supplied by the Suffolk County Water Authority (SCWA) — Distribution Area 30. The most recent published results show PFPeA at 5 ng/L, Acesulfame-K at 0.11 µg/L. Every figure below is shown against its NY or EPA limit and cited to its source.
Reported contaminants
Mattituck water, by the numbers
These are the results for the whole SCWA distribution area. See every community in Area 30
ND means not detected. Units: µg/L is micrograms per liter (parts per billion); ng/L is nanograms per liter (parts per trillion); mg/L is milligrams per liter (parts per million). Status uses the words below, near, exceeds, or trace — not color alone.
Source: Suffolk County Water Authority 2026 Drinking Water Quality Report (2025 data) (opens in a new tab)
| Substance | Detected level | Limit | Status |
|---|---|---|---|
| PFAS | |||
| PFOA (about this substance) | ND ng/LRange ND–4 | 10NYS MCL | Trace — detected in some samples |
| PFOS (about this substance) | ND ng/LRange ND–3 | 10NYS MCL | Trace — detected in some samples |
| PFBA (about this substance) | ND ng/LRange ND–72 | 50000NYS MCL (unspecified organic contaminant) | Trace — detected in some samples |
| PFHxA (about this substance) | ND ng/LRange ND–53 | 50000NYS MCL (unspecified organic contaminant) | Trace — detected in some samples |
| PFBS (about this substance) | ND ng/LRange ND–5 | 50000NYS MCL (unspecified organic contaminant) | Trace — detected in some samples |
| PFPeA (about this substance) | 5 ng/LRange ND–300 | 50000NYS MCL (unspecified organic contaminant) | Below limit |
| Tested for and not detected (5): 6:2 FTS (about this substance), PFHpA (about this substance), PFHxS (about this substance), PFNA (about this substance), PFPeS (about this substance) | |||
| Industrial solvents & 1,4-dioxane | |||
| 1,4-Dioxane (about this substance) | ND µg/LRange ND–0.08 | 1NYS MCL | Trace — detected in some samples |
| Tested for and not detected (5): cis-1,2-Dichloroethene (about this substance), 1,1-Dichloroethene (about this substance), Tetrachloroethene (PCE) (about this substance), 1,1,1-Trichloroethane (about this substance), Trichloroethene (TCE) (about this substance) | |||
| Nitrate, metals & inorganics | |||
| Nitrate (about this substance) | 4.90 mg/LRange 0.39–7.60 | 10EPA MCL | Below limit |
| Color (about this substance) | ND Color UnitsRange ND–5 | 15NYS secondary standard | Trace — detected in some samples |
| Gross alpha (about this substance) | ND pCi/LRange ND–3.92 | 15EPA MCL | Trace — detected in some samples |
| Chloride (about this substance) | 57.0 mg/LRange 15.5–183.9 | 250NYS secondary standard | Below limit |
| Sulfate (about this substance) | 34.6 mg/LRange 7.8–69.8 | 250NYS secondary standard | Below limit |
| Turbidity (about this substance) | 0.67 NTURange ND–3.54 | 5EPA MCL | Below limit |
| Iron (about this substance) | 34 µg/LRange ND–106 | 300NYS secondary standard | Below limit |
| Perchlorate (about this substance) | 1.86 µg/LRange ND–4.47 | 18NYS MCL | Below limit |
| Copper (about this substance) | ND mg/LRange ND–0.11 | 1.3EPA action level | Trace — detected in some samples |
| Gross beta (about this substance) | 4.10 pCi/LRange ND–12.50 | 50EPA MCL | Below limit |
| Manganese (about this substance) | 24 µg/LRange ND–135 | 300NYS secondary standard | Below limit |
| Barium (about this substance) | 0.13 mg/LRange ND–0.07 | 2EPA MCL | Below limit |
| 1,2-Dichloropropane (about this substance) | ND µg/LRange ND–0.29 | 5NYS MCL (principal organic contaminant) | Trace — detected in some samples |
| Metolachlor OA (about this substance) | ND µg/LRange ND–2.85 | 50NYS MCL (unspecified organic contaminant) | Trace — detected in some samples |
| Metolachlor (about this substance) | ND µg/LRange ND–2.39 | 50NYS MCL (unspecified organic contaminant) | Trace — detected in some samples |
| Tetrachloroterephthalic Acid (about this substance) | 1.48 µg/LRange ND–13.65 | 50NYS MCL (unspecified organic contaminant) | Below limit |
| Alachlor ESA (about this substance) | ND µg/LRange ND–1.44 | 50NYS MCL (unspecified organic contaminant) | Trace — detected in some samples |
| Alachlor OA (about this substance) | ND µg/LRange ND–0.98 | 50NYS MCL (unspecified organic contaminant) | Trace — detected in some samples |
| Metalaxyl (about this substance) | ND µg/LRange ND–0.39 | 50NYS MCL (unspecified organic contaminant) | Trace — detected in some samples |
| Chromium (total) (about this substance) | 0.5 µg/LRange ND–3.1 | 100EPA MCL | Below limit |
| Saccharin (about this substance) | ND µg/LRange ND–0.24 | 50NYS MCL (unspecified organic contaminant) | Trace — detected in some samples |
| Sucralose (about this substance) | 0.20 µg/LRange ND–1.12 | 50NYS MCL (unspecified organic contaminant) | Below limit |
| Hexavalent Chromium (about this substance) | 0.36 µg/LRange ND–2.86 | 100EPA MCL | Below limit |
| Acesulfame-K (about this substance) | 0.11 µg/LRange ND–0.94 | 50NYS MCL (unspecified organic contaminant) | Below limit |
| Imidacloprid (about this substance) | ND µg/LRange ND–0.10 | 50NYS MCL (unspecified organic contaminant) | Trace — detected in some samples |
| Alkalinity (about this substance) | 70.1 mg/LRange ND–170.6 | No regulatory limit | — |
| Aluminum (about this substance) | 0.05 mg/LRange ND–0.21 | No regulatory limit | — |
| Bromide (about this substance) | 106.6 µg/LRange ND–461.8 | No regulatory limit | — |
| Calcium (about this substance) | 33.8 mg/LRange 11.5–60.9 | No regulatory limit | — |
| CO2, calculated (about this substance) | 7.0 mg/LRange 0.3–50.0 | No regulatory limit | — |
| Hardness (total) (about this substance) | 115.6 mg/LRange 44.2–212.0 | No regulatory limit | — |
| Lithium (about this substance) | ND µg/LRange ND–2.7 | No regulatory limit | Trace — detected in some samples |
| Magnesium (about this substance) | 7.59 mg/LRange 3.36–16.06 | No regulatory limit | — |
| Nickel (about this substance) | 0.6 µg/LRange ND–1.7 | No regulatory limit | — |
| pH (about this substance) | 7.4 pH UnitsRange 5.9–8.5 | No regulatory limit | — |
| pH, field (about this substance) | 7.5 pH UnitsRange 6.0–8.8 | No regulatory limit | — |
| Phosphate, total (about this substance) | 0.45 mg/LRange ND–3.47 | No regulatory limit | — |
| Potassium (about this substance) | 2.44 mg/LRange 0.63–5.72 | No regulatory limit | — |
| Silicon (about this substance) | 6.5 mg/LRange 4.2–8.3 | No regulatory limit | — |
| Sodium (about this substance) | 37.0 mg/LRange 8.4–94.5 | No regulatory limit | — |
| Specific conductance (about this substance) | 417 umho/cmRange 100–855 | No regulatory limit | — |
| Strontium (about this substance) | 0.115 mg/LRange 0.051–0.204 | No regulatory limit | — |
| Titanium (about this substance) | ND µg/LRange ND–6.6 | No regulatory limit | Trace — detected in some samples |
| Total Organic Carbon (TOC) (about this substance) | ND mg/LRange ND–0.7 | No regulatory limit | Trace — detected in some samples |
| Vanadium (about this substance) | ND µg/LRange ND–1.2 | No regulatory limit | Trace — detected in some samples |
| Tested for and not detected (38): Carbamazepine (about this substance), Dilantin (about this substance), 5-(4-Hydroxyphenyl)-5-Phenylhydantoin (about this substance), Ibuprofen (about this substance), Lamotrigine (about this substance), Meprobamate (about this substance), Phenobarbital (about this substance), Primidone (about this substance), Stevioside (about this substance), Ammonia (as N) (about this substance), Arsenic (about this substance), Boron (about this substance), Cobalt (about this substance), Fluoride (about this substance), Molybdenum (about this substance), Nitrite (about this substance), Uranium (about this substance), Zinc (about this substance), Chlordane (about this substance), Diethyltoluamide (DEET) (about this substance), Chlorobenzene (about this substance), Chlorodifluoromethane (about this substance), Chloromethane (about this substance), Dichlorodifluoromethane (about this substance), 1,1-Dichlorethane (about this substance), Ethyl Benzene (about this substance), Methylene Chloride (about this substance), MTBE (about this substance), o-Xylene (about this substance), p,m-Xylene (about this substance), Tetrahydrofuran (about this substance), 1,2,4-Trichlorobenzene (about this substance), Trichlorofluoromethane (about this substance), 1,2,3-Trichloropropane (about this substance), 1,1,2-Trichlorotrifluoroethane (about this substance), Radon-222 (about this substance), Radium-226 (about this substance), Radium-228 (about this substance) | |||
| Lead & copper | |||
| Copper (tap samples) (about this substance) | 0.377 mg/L(90th percentile)Range 0.022–0.620 | 1.3EPA action level | Below limit |
| Lead (about this substance) | 1.25 µg/L(90th percentile)Range ND–6.47 | 15EPA action level | Below limit |
| Disinfection byproducts | |||
| Free Chlorine (about this substance) | 0.93 mg/LRange 0.11–1.80 | 4EPA MRDL | Below limit |
| Monochloroacetic Acid (about this substance) | ND µg/LRange ND–2.85 | 60EPA MCL | Trace — detected in some samples |
| Bromochloroacetic Acid (about this substance) | ND µg/LRange ND–1.96 | 50EPA MCL | Trace — detected in some samples |
| Bromodichloroacetic Acid (about this substance) | ND µg/LRange ND–1.43 | 50EPA MCL | Trace — detected in some samples |
| Dichloroacetic Acid (about this substance) | ND µg/LRange ND–1.61 | 60EPA MCL | Trace — detected in some samples |
| Trichloroacetic Acid (about this substance) | ND µg/LRange ND–1.02 | 60EPA MCL | Trace — detected in some samples |
| Dibromoacetic Acid (about this substance) | 0.95 µg/LRange ND–1.99 | 60EPA MCL | Below limit |
| Dibromochloromethane (about this substance) | 0.50 µg/LRange ND–8.93 | 80EPA MCL | Below limit |
| Bromoform (about this substance) | 0.46 µg/LRange ND–6.29 | 80EPA MCL | Below limit |
| Chloroform (about this substance) | 0.40 µg/LRange ND–2.41 | 80EPA MCL | Below limit |
| Bromodichloromethane (about this substance) | 0.32 µg/LRange ND–4.88 | 80EPA MCL | Below limit |
| Chlorate (about this substance) | 0.10 mg/LRange ND–0.30 | No regulatory limit | — |
Water characteristics
| Substance | Detected level | Limit | Status |
|---|---|---|---|
| Sodium Cyclamate (about this substance) | ND µg/L | 50NYS MCL (unspecified organic contaminant) | Not detected |
Status reflects the average of all samples. Individual readings may be higher; see range.
Values are ranges/averages across all wells feeding each distribution area at the entry point. A home near an area boundary may receive water from the adjacent area. Some homes here draw from private wells. These results do not apply to well water. Area assignment is read from SCWA's distribution-area map. Confirm your address with SCWA's See My Water Quality lookup (https://www.scwa.com/mywaterquality/ (opens in a new tab)). About 35% of Mattituck's land lies inside a public water service area (Suffolk County Water Authority), per the NYS Department of Health boundaries EPA publishes; the rest is on private wells. These results apply only to public water.
Your water district
Who supplies Mattituck’s water
Suffolk County Water Authority
EPA compliance
Federal violation record for Mattituck’s suppliers
The annual report above lists what was found in the water. EPA’s compliance database records whether each supplier met its testing, treatment, and reporting obligations.
- Suffolk County Water Authority
EPA ID NY5110526 · serves about 1,100,000 people
- Violations 2022–2026
- 3
- Health-based
- 0
- Last violation
- 2025
Compliance counts are EPA Safe Drinking Water Information System records pulled directly from EPA. Most violations are monitoring or reporting lapses, not unsafe water; health-based violations (a contaminant limit, disinfectant level, or treatment technique) are counted separately. A system listed for a ZIP code may serve only part of it.
What the numbers mean
Mattituck is served largely by SCWA, with private wells mixed in toward its edges. Western and central Suffolk carry Long Island's signature groundwater story — trace 1,4-dioxane and PFAS from historic land use, plus nitrate loading from lawns and septic systems. SCWA treats for these at its wellfields, but a point-of-entry system gives you a second barrier and covers any private-well portion of the neighborhood.
What this means for filtration
Matching Mattituck’s water to a system
For Mattituck, the numbers point first to under-sink reverse osmosis and whole-house carbon filtration: dissolved contaminants close to their limits.
- Recommended
Under-Sink Reverse Osmosis
Dissolved contaminants close to their limits
Nitrate averaged 4.9 mg/L (limit 10), moderate but present; reverse osmosis reduces it at the tap. PFOA/PFOS reached 4 ng/L (ppt) in at least one sample — under New York's 10 ppt limit but at or above the 4.0 ppt federal MCL, with federal compliance due April 26, 2029. Whether an under-sink reverse osmosis model reduces PFOA or PFOS depends on that model's certification or performance data sheet. Sodium averaged 37 mg/L, above the 20 mg/L level New York flags for sodium-restricted diets. Perchlorate was detected up to 4.47 µg/L (limit 18). The supplier's 90th-percentile lead result was 0.00125 mg/L (1 ppb) against the 15 ppb action level. Lead enters water from a home's own service line and fixtures, so the system figure says little about any one house; a filter certified for lead (NSF/ANSI 53) or reverse osmosis at the kitchen tap reduces it at the point you drink.
Explore Under-Sink Reverse Osmosis - Recommended
Whole-House Carbon Filtration
Chlorine residual 0.93 mg/L
Free chlorine averaged 0.93 mg/L at the entry point (limit 4), the residual that gives tap water its pool taste and dries skin and hair. Chlorination by-products (trihalomethanes) reached 4.88 µg/L in some samples against an 80 µg/L limit for the group; they are absorbed in the shower as well as drunk.
Explore Whole-House Carbon Filtration - Worth considering
Whole-House + Softener Combo
Hardness 116 mg/L, about 6.8 grains per gallon
At 116 mg/L (6.8 gpg) the water is moderately hard. A softener is a comfort choice here, not a necessity; some homes near the top of the 212 mg/L range will notice scale.
Explore Whole-House + Softener Combo - Worth considering
Private Well Treatment
Private wells in part of the community
Part of Mattituck is on private wells that none of these figures cover; a well needs its own test, and a well package is sized to what it finds.
Explore Private Well Treatment
Questions
Mattituck water FAQ
Nearby Suffolk County towns
Free in-home test
See what’s really in your Mattituck water.
Published reports cover the public supply — a free in-home test measures your taps (and your well, if you have one), then we walk you through the results.